5 Replies Latest reply on Jan 14, 2010 4:00 PM by Shad

    DP45SG - Parameters

    Shad

      Hello

      I bought this motherboard a few weeks ago. Unfortunately I did not manage to read parameter(Voltage, Fanspeed ..)

       

      I tried some Programms (Speedfan, SIW, CPUID), but no paramertes at all ( And no control of Fanspeed!)

      Some pics:

      http://img683.imageshack.us/img683/7720/unbenanntvx.png
      http://img258.imageshack.us/img258/7853/unbenannt2x.png

      should there be a „andigilog aSC7621“ sensor ?

       

      System:

      • CPU: Intel Core2Duo E850
      • Mobo DP45SG :Bios(latest 121) Rev:A3 (IDCC not working)
      • 2x Kingston HyperX DIMM XMP Kit 4GB PC3-10667U CL7-7-7-20 (KHX1333C7D3K2/4GX)
      • OS: Windows 7 Prof 64bit
        • 1. Re: DP45SG - Parameters
          Aryan2411

          Hi there,

           

          The board has an option called Intel Management Engine Bios.
          You can access the MEBx bios by pressing Ctrl+P.
          Some board needs to have the settings enabled in the Bios in order to access it.
          Bios >> Boot Configuration >> Intel ME Setup Prompt: Enable.

           

          Go into the Ctrl + P MEBx Bios
          Intel ME Configuration >> Enter
          Intel Quiet System Technology >> Enable.
          Save and Exit

           

          Similar Doc

           

          Kind Regards,
          Aryan.

          • 2. Re: DP45SG - Parameters
            Shad

            Thank you for your reply.

             

            But nothing happens wen pressing ctrl+P and there is no "Intel ME Setup Prompt" setting in the Bios.

             

            sincerely

            Hubert

            • 3. Re: DP45SG - Parameters
              Shad

              i keep on investigating!

               

              It seems that there is only one Programm which is supporting the Sensor(Mobo with Rev3 - Sensortyp Analog Devices ADT7490  (SMBus 2Eh)):
              Everest Ultimate Edition.

              • 4. Re: DP45SG - Parameters
                Aryan2411

                Hello,

                 

                Have you checked if you can read these parameters in the bios?

                 

                Check this link, try to install intel desktop utilities.

                 

                I dont remember if you have got management engine section in the bios or it is separate you need to press ctrl + p to access the mebx.

                 

                Let me know the progress of the problem.

                 

                Kind Regards,

                Aryan.

                • 5. Re: DP45SG - Parameters
                  Shad

                  Hi

                   

                  • The Parameters are readable in the Bios (Voltage and Speedfan)
                  • There is no management engine section in the Bios
                  • CRTL+p is not working

                   

                  Nachricht geändert durch Shad