1 Reply Latest reply on Mar 9, 2016 1:38 AM by Sandy_Intel

    Intel ®  Ethernet Converged Network Adapter X520-DA2

    Paolo_M

      Hi, I have an Intel network adapter Ethernet Server Adapter X520-DA2,

      you know if it is compatible with Nexenta CE version 3.1.6 FP3

      I tried to add it but do not see it from the available adapters.

       

      With the lspci -v command displays the following information. They can be useful?
      Thank you

      Paolo

       

      07:00.0 Ethernet controller: Intel Corporation Unknown device 1572 (rev 01)

              Subsystem: Intel Corporation Unknown device 0007

              Flags: bus master, fast devsel, latency 0, IRQ 10

              Memory at f8000000 (64-bit, prefetchable)

              Memory at f7ff8000 (64-bit, prefetchable)

              Expansion ROM at fbb00000 [disabled]

              Capabilities: [40] Power Management version 3

              Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable-

              Capabilities: [70] MSI-X: Enable- Mask- TabSize=129

              Capabilities: [a0] Express Endpoint IRQ 0

              Capabilities: [e0] Vital Product Data

       

      07:00.1 Ethernet controller: Intel Corporation Unknown device 1572 (rev 01)

              Subsystem: Intel Corporation Unknown device 0000

              Flags: bus master, fast devsel, latency 0, IRQ 10

              Memory at f9800000 (64-bit, prefetchable)

              Memory at f97f8000 (64-bit, prefetchable)

              Expansion ROM at fbb80000 [disabled]

              Capabilities: [40] Power Management version 3

              Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable-

              Capabilities: [70] MSI-X: Enable- Mask- TabSize=129

              Capabilities: [a0] Express Endpoint IRQ 0

              Capabilities: [e0] Vital Product Data