1 2 Previous Next 15 Replies Latest reply on Oct 15, 2016 7:41 AM by FGT

    unable to compile - missing file error - new installation

    alb4h

      Hi,

      I'm hoping someone can help me get me past an error I have trying to connect to a Galileo 2 for the first time.

       

      I'm on a Windows 8.1 machine.

       

      Here's what I've tried so far.

       

      From

      https://software.intel.com/en-us/iot/hardware/galileo/downloads

      downloaded

      http://downloadmirror.intel.com/25384/eng/w_galileo_2015.0.010.exe

       

      installed to c:/intel

      successful installation of device drivers,  then this appeared.

      sketchbook error.png

       

      Hung at this point in the installation:

      hang.png

      This is what the installed arduino folder looked like at this point:

      install folder.png

       

      At this point I ended the Arduino_debug task in task manager

      Still stuck on the installation of Arduino (6 of 6)

       

      I ended the installation by end task in task manager

       

      When I run Arduino, the following error appears:

      sketchbook error.png

       

      When I run Arduino from the intel folder, the galileo board and the port show up fine from within the arduino sketch.

       

      However when trying to compile the blink sketch I get this error:

       

      Arduino: 1.6.5 (Windows 8.1), Board: "Intel® Galileo Gen2"

       

      Build options changed, rebuilding all

       

       

      C:\Users\Ann\AppData\Roaming\Arduino15\packages\Intel\tools\i586-poky-linux-uclibc\1.6.2+1.0/pokysdk/usr/bin/i586-poky-linux-uclibc/i586-poky-linux-uclibc-g++ -m32 -march=i586 --sysroot=C:\Users\Ann\AppData\Roaming\Arduino15\packages\Intel\tools\i586-poky-linux-uclibc\1.6.2+1.0/i586-poky-linux-uclibc -c -g -Os -w -fno-exceptions -ffunction-sections -fdata-sections -MMD -D__ARDUINO_X86__ -Xassembler -mquark-strip-lock=yes -march=i586 -m32 -DARDUINO=10605 -IC:\Users\Ann\AppData\Roaming\Arduino15\packages\Intel\hardware\i586\1.6.7+1.0\cores\arduino -IC:\Users\Ann\AppData\Roaming\Arduino15\packages\Intel\hardware\i586\1.6.7+1.0\variants\galileo_fab_g C:\Users\Ann\AppData\Local\Temp\build1190872854453120664.tmp\Blink.cpp -o C:\Users\Ann\AppData\Local\Temp\build1190872854453120664.tmp\Blink.cpp.o

       

      (SNIPPED ABOUT 8 PAGES OF OUTPUT HERE…..)

       

      C:\Users\Ann\AppData\Roaming\Arduino15\packages\Intel\tools\i586-poky-linux-uclibc\1.6.2+1.0/pokysdk/usr/bin/i586-poky-linux-uclibc/i586-poky-linux-uclibc-g++ -m32 -march=i586 --sysroot=C:\Users\Ann\AppData\Roaming\Arduino15\packages\Intel\tools\i586-poky-linux-uclibc\1.6.2+1.0/i586-poky-linux-uclibc -Os -Wl,--gc-sections -march=i586 -o C:\Users\Ann\AppData\Local\Temp\build1190872854453120664.tmp/Blink.cpp.elf C:\Users\Ann\AppData\Local\Temp\build1190872854453120664.tmp\Blink.cpp.o C:\Users\Ann\AppData\Local\Temp\build1190872854453120664.tmp\variant.cpp.o C:\Users\Ann\AppData\Local\Temp\build1190872854453120664.tmp/core.a -LC:\Users\Ann\AppData\Local\Temp\build1190872854453120664.tmp -lm -lpthread

      i586-poky-linux-uclibc-g++: error: C:\Users\Ann\AppData\Local\Temp\build1190872854453120664.tmp/core.a: No such file or directory

      Error compiling.

       

       

      At this point this is what the device manager shows:

      device manager.png

       

       

      Rebooted computer. Recompiled  blink.

      Did NOT  get Sketchbook Folder disappeared window.

      Got same error .

       

      Any help is appreciated. I would really like to use this board.

       

      Thanks,

      Ann

        1 2 Previous Next