Thanks for the links.
This morning when I tried to boot the Galileo it came up with my microSD inserted.
Friday the last thing I did was to try to run Arduino sketches, but without luck and I had to stop.
Could it be the case that the Arduino IDE upgraded the firmware and fixed the problem?
Anyway happy that it is working again.
Thanks for your reply.
Well, I don't remember in detail what I did Friday evening. But I did ran some sketches that did not work, and I tried to install upgrades.
Don't know why, but everything works now. .
What command to I use to see the firmware version on my system? Do you refer to BSP version?
Good to know your Galileo is working, hard to know why, though.
The Intel Galileo Firmware Updater shows the "Current Board Firmware", I don't know about BSP version, I think it's closely related, but I'm not completely sure about...
Replying to myself just to mention that DiegoV_Intel posted in another thread:
Also, check the output of the following command: cat /sys/firmware/board_data/flash_version. We can check the firmware version with that command. For the firmware version 1.0.4, the output should be 0x01000400.