3 Replies Latest reply on Dec 18, 2015 5:04 PM by VegetableJedi

    My Edison has been bricked during dfu flash.

    VegetableJedi

      Hello.

       

      My Edison has been stopped during flashing with dfu-flash. After reboot, it has been bricked. :-(

       

      During boot sequence, it displays messages below:

      --------------------------------------------------------------------------------------------------------------

      ******************************

      PSH KERNEL VERSION: b0182b2b

                      WR: 20104000

      ******************************

       

      SCU IPC: 0x800000d0  0xfffce92c

       

      PSH miaHOB version: TNG.B0.VVBD.0000000c

       

      microkernel built 11:24:08 Feb  5 2015

       

      ******* PSH loader *******

      PCM page cache size = 192 KB

      Cache Constraint = 0 Pages

      Arming IPC driver ..

      Adding page store pool ..

      PagestoreAddr(IMR Start Address) = 0x04899000

      pageStoreSize(IMR Size)          = 0x00080000

       

      *** Ready to receive application ***

       

       

      U-Boot 2014.04 (Dec 15 2015 - 01:50:57)

       

             Watchdog enabled

      DRAM:  980.6 MiB

      MMC:   tangier_sdhci: 0

      In:    serial

      Out:   serial

      Err:   serial

      Hit any key to stop autoboot:  0

      Target:ifwi

      Partitioning already done...

      Partitioning already done...

      Saving Environment to MMC...

      Writing to redundant MMC(0)... done

      dfu_fill_entity_mmc: Memory layout (raw) not supported!

      ERROR: DFU entities configuration failed!

       

      at drivers/dfu/dfu.c:71/dfu_init_env_entities()

      dfu - Device Firmware Upgrade

       

      Usage:

      dfu <USB_controller> <interface> <dev> [list|timeout]

        - device firmware upgrade via <USB_controller>

          on device <dev>, attached to interface

          <interface>

          [list] - list available alt settings

          [timeout] - specify inactivity timeout in sec, doesn't work whit list

      Unknown boot mode: boot

      Saving Environment to MMC...

      Writing to MMC(0)... done

      Resetting to default boot mode and reboot...

      resetting ...

      --------------------------------------------------------------------------------------------------------------

       

      Who has any experiences like this? Help me...