Running Intel Matrix Storage Console on HP Pavilion on Vista. Operating system is on Raid 0 and data is on Raid 1. Had an initial drive failure on the raid 1 array, replaced the drive and the restore failed before it was completed. I have now replaced the remaining failed raid 1 drive. The initial raid 1 replacement shows under the raid 1 array as Port 4 and as normal. The second replacement now shows as a "Non-RAID Hard Drive" as Port 3:..... The only option shown is to "Mark as Spare". It also shows as "NormaL". How do I get this reassigned to Array_0001 which is giving me a red X for "Missing Hard Drive"? I would suspect that there is NO DATA on either or the raid 1 replacement drives.