Good news (just in time for the holidays)! We have released the new version of the Intel® SSD Toolbox (version 1.2) which fixes the issue with the Intel® SSD Optimizer.
Intel NSG Marketing Division
In my case it just says "Failed":
I reinstalled Toolbox v.1.1 and it shows me that everything is fine:
After that I installed new drivers (Intel® Rapid Storage Technology v.22.214.171.1247) for my Intel(R) ICH9M-E/M SATA AHCI Controller and nothing has changed, Toolbox 1.2 shows the same error and 1.1 works fine.
Win 7 x64
HP EliteBook 6930p
T9400, PM45 chipset, ICH9M-E/M SATA AHCI Controller
SSDSA2M080G2GC with last (HD) firmware with such SMART attrib:
I have the same problem as Isidur.
I get the error screen when trying to run an optimization.
Here are my system details:
Windows 7 - 64bit
Zotac 9300 Mobo (Nvidia 730i chipset)
Intel 80GB G2 Postville (2CV102HD Firmware)
Standard AHCI 1.0 ATA Controller Driver (3.0Gb/s SATA)
Drive Policy - Better Performance, Write Caching on, Write Cache buffer flushing off
The new toolbox says this when making a scheduled TRIM task:
The Intel SSD Optimizer may take many minutes to complete. While in progress, only 1 GB of space will be left free on your drive. Please avoid/minimize system use at the times you have scheduled the Optimizer to run. Once complete, all free space will be returned.
So, this toolbox fills the entire drive but 1GB with data and then frees it again to achieve the same as the old toolbox without corrupting restore points? If yes, this behavior increases host write load on the SSD by its capacity minus 1GB every week - I dont think I want that. I'll stick with the old toolbox. Not using windows restore points anyway...
Installed the new firmare and the latest SSD Toolbox (ver.1.2)
It works fine except for the SSD Management Tools. When I am trying to Run it the Toolbox is reporting an error "... could not run due to the presence of Volume Shadow Copy Service data..."
My config is Windows XP Pro (on Sony Vaio Z11MRN), Intel X25-M 160GB G2 (silver case), Volume Shadow Copy Service is disabled (now). Tried running the Toolbox in Safe mode with almost everything (including anti-virus) disabled with the same result.
People told me that 1.1 would probably work for me, but apparently that version is no longer available for download.