6 Replies Latest reply on Sep 19, 2016 10:23 PM by DSkryabin

    XL710-Q2 doesn't support QSPF+ configuration modification

    IrisLee

      Hi,


       

      I updated NVM and used qcu for configuring Intel XL710QDA2 to 4x10 mode.

      This adapter has two 40Gb ports.

      However the qcu displayed that the adapter doesn’t support configuration modification as below.

       

      How can I config to support 4x10 mode with this adapter?

       

       

      Thanks,

      Iris

       

      I'd like to set up Intel XL710

      [root@centos12 Linux_x64]# ethtool -i eth8

      driver: i40e

      version: 1.3.47

      firmware-version: 4.42 0x80001932 0.0.0

      bus-info: 0000:08:00.0

      supports-statistics: yes

      supports-test: yes

      supports-eeprom-access: yes

      supports-register-dump: yes

      supports-priv-flags: yes

      [root@centos12 Linux_x64]#

       

      [root@centos12 qcu]# ./qcu64e /devices

      Intel(R) QSFP+ Configuration Utility

       

      QCU version: v1.24.35.01

      Copyright(C) 2015 by Intel Corporation.

      Software released under Intel Proprietary License.

       

      NIC B:D   Ven-Dev   Mode   Adapter Name

      === ===== ========= ====== ====================================================

      1) 08:00 8086-1583 N/A    Intel(R) Ethernet Converged Network Adapter XL710-Q2


       

      [root@centos12 qcu]# ./qcu64e /nic=1 /info

      Intel(R) QSFP+ Configuration Utility

       

      QCU version: v1.24.35.01

      Copyright(C) 2015 by Intel Corporation.

      Software released under Intel Proprietary License.

       

      QSFP+ Configuration modification is not supported by this adapter.

       

      [root@centos12 qcu]#