3 Replies Latest reply on Dec 3, 2009 10:08 AM by janderk

    4KB Random read - CrystalDiskMark vs. Iometer

    eka

      I've seen that most people here use CrystalDiskMark to measure the performance. However, I've read several artitcles on anandtech.com (and other places) where they use Iometer instead. I'm mostly intrested in "4KB random read", which should roughly translate into startup time, both for OS and for apps. What I've seen is that when using CrystalDiskMark, numbers around 20 MB/s are common, but according to the tests on Anandtech, we should get around 60 MB/s! For example:

       

      http://www.anandtech.com/storage/showdoc.aspx?i=3667&p=6

       

      (I'm mostly concerned about the 160 GB G2 drive, but it seems to be the same for other devices as well)

       

      Also, I should get higher "random read" than "random write". This is not the case with CrystalDiskMark, where write performance is roughly twice the read performance. What's up here, do the programs do their testing in different ways? Anyone knows?