1 Reply Latest reply on Nov 29, 2009 10:49 AM by Aryan2411

    Boot problem with DG43NB

    StanCzapka

      Problem with DG43NB stopped working and just rebuts after starting the post, safe mode dose not work. I unplugged the cd  reader, tried another hdd, and tried pcie vidio card and running with just one memory dim.The machine stops on SPDT.sys when loading in safe mode. Prior to this the system worked fine for 9 months.

        • 1. Re: Boot problem with DG43NB
          Aryan2411

          Hello,

           

          Did you have Daemon tool or Alcohol 120% installed on your system previously?

           

          If yes, try this:

           

          If your system has some problems with SPTD installation you can do as follows:

          1. Boot in safe mode and press ESC key when you see on bottom line of display: "Press ESC to cancel loading SPTD.sys". This will abort loading of SPTD layer.

          2. Find "HKEY_LOCAL_MACHINE\System\CurrentControlSet\ Services\sptd" registry key in REGEDIT and set DWORD Start value to 4 (i.e. disabled).

          3. Reboot again in normal mode and check if your issue is solved

           

          All the best,

           

          Kind Regards,

          Aryan.

          1 of 1 people found this helpful