10 Replies Latest reply on Oct 16, 2015 7:44 PM by neuberfran

    Arduino sketch error to access librarie <IoTkit.h>

    neuberfran

      Hi guys,

       

      I put my device (intel edison) in IOT CLOUD ANALYTICS

      When I tried do this sketch iotkit-samples/IotKitActuationExample.ino at master · enableiot/iotkit-samples · GitHub

      I had this error:

      sketch_sep29c.ino:1:68: fatal error: IoTkit.h: No such file or directory

      compilation terminated.

      Error compiling.

       

        This report would have more information with

        "Show verbose output during compilation"

        enabled in File > Preferences.

      fotoa.pngfotob.png

        • 1. Re: Arduino sketch error to access librarie <IoTkit.h>
          Intel_Alvarado

          Hi,

           

          Take a look at the code, next to the first include you’ll see:

          #include <IoTkit.h>    // include IoTkit.h to use the Intel IoT Kit
          

           

          Have you included it? You can find IoTkit.h here iotkit-samples/IoTkit.h at master · enableiot/iotkit-samples · GitHub

           

          Sergio

          • 2. Re: Arduino sketch error to access librarie <IoTkit.h>
            neuberfran

            Sergio,


            Yes, I included. You can see in second photo

             

            I downloaded enableiot/iotkit-samples · GitHub zip file and included before

            • 3. Re: Arduino sketch error to access librarie <IoTkit.h>
              Intel_Alvarado

              Hi,

               

              Have you completed all prerequisites? Take a look at the note of the IotKitActuationExample.ino:

              //Prequisites:

              // 1. Device must be activated

              // 2. Agent must be started and configured to use MQTT protocol

              // 3. A component named "power" of the default type "powerswitch.v1.0" must be

              //    registered on the device. The default powerswitch.v1.0 component type has

              //    a command named "LED.v1.0"

              //When executed from Control section on dashboard with value 0, LED light is turned off

              //When executed from Control section on dashboard with value 1, LED light is turned on

              //iotkit-agent must use MQTT connection (not REST) for actuation to work.

              //It also sends 1 as power when agent is started.

               

              Sergio

              • 4. Re: Arduino sketch error to access librarie <IoTkit.h>
                neuberfran

                Hi Sergio,

                 

                Yes, I did it. The problem is in the aforementioned library

                 

                You could do this sketch in your machine ?

                • 5. Re: Arduino sketch error to access librarie <IoTkit.h>
                  neuberfran

                  Hi Sergio

                   

                  In addition to the error with iotkit.h now I realized that I have problem with MQTT. It is installed (: ~ # iotkit-admin protocol MQTT) ok.   But the commands show that it does not appear:

                   

                  root@edison:~# iotkit-admin move-data-directory ~/.data

                  2015-10-06T18:23:18.294Z - info: Data directory moved

                  root@edison:~# iotkit-admin protocol mqtt

                  2015-10-06T18:23:33.562Z - info: protocol set to: mqtt

                  root@edison:~# iotkit-admin -V

                  1.7.0

                  root@edison:~# npm info postinstall iotkit-agent@1.7.0

                  npm ERR! Error: getaddrinfo ESRCH

                  npm ERR!     at errnoException (dns.js:37:11)

                  npm ERR!     at Object.onanswer [as oncomplete] (dns.js:124:16)

                  npm ERR! If you need help, you may report this *entire* log,

                  npm ERR! including the npm and node versions, at:

                  npm ERR! <http://github.com/npm/npm/issues>

                   

                  npm ERR! System Linux 3.10.17-poky-edison+

                  npm ERR! command "node" "/usr/bin/npm" "info" "postinstall" "iotkit-agent@1.7.0"

                  npm ERR! cwd /home/root

                  npm ERR! node -v v0.10.38

                  npm ERR! npm -v 1.4.28

                  npm ERR! syscall getaddrinfo

                  npm ERR! code ESRCH

                  npm ERR! errno ESRCH

                  npm ERR!

                  npm ERR! Additional logging details can be found in:

                  npm ERR! /home/root/npm-debug.log

                  npm ERR! not ok code 0

                   

                  root@edison:~# iotkit-admin catalog

                  2015-10-06T19:17:39.431Z - info: Getting Component Getting

                  2015-10-06T19:17:39.461Z - info: Trying with Secure Connection tobroker.us.enableiot.com:8883

                  2015-10-06T19:17:39.568Z - info: Waiting for MQTTConnector to connect # 1

                  2015-10-06T19:17:41.243Z - info: MQTTConnector: Connection successful to broker.us.enableiot.com:8883

                  2015-10-06T19:18:41.272Z - error: Connection to MQTT broker is closed. Retrying...

                  2015-10-06T19:18:43.734Z - info: Connection to MQTT broker established.

                  2015-10-06T19:19:43.755Z - error: Connection to MQTT broker is closed. Retrying...

                  2015-10-06T19:19:46.261Z - info: Connection to MQTT broker established.

                  2015-10-06T19:20:46.328Z - error: Connection to MQTT broker is closed. Retrying...

                  2015-10-06T19:20:49.003Z - info: Connection to MQTT broker established.

                  2015-10-06T19:21:49.239Z - error: Connection to MQTT broker is closed. Retrying...

                  • 6. Re: Arduino sketch error to access librarie <IoTkit.h>
                    Intel_Alvarado

                    Hi,

                     

                    I believe 1.7.0 is not the latest version available. Follow these instructions to update:

                     

                    If you installed the Agent globally using NPM or if it came pre-installed

                    npm update -g iotkit-agent
                    

                    If you installed locally using NPM

                    npm update iotkit-agent (from within your local node_modules directory)
                    
                    

                    If you initially installed locally using Git

                    git stash
                    git pull
                    npm -d install
                    
                    

                     

                    After doing this run this command and let me know the output of iotkit-admin –V and iotkit-admin test

                     

                    Sergio

                    • 7. Re: Arduino sketch error to access librarie <IoTkit.h>
                      neuberfran

                      root@edison:~# iotkit-admin -V

                      1.8.2

                      root@edison:~# iotkit-admin test

                      2015-10-07T00:29:55.003Z - info: Trying to connect to host ...

                      2015-10-07T00:30:02.066Z - info: Connected to dashboard.us.enableiot.com

                      2015-10-07T00:30:02.070Z - info: Environment: prod

                      2015-10-07T00:30:02.072Z - info: Build: 0.14.3

                      2015-10-07T00:30:02.079Z - info: Trying to connect to WS server ...

                      2015-10-07T00:30:05.224Z - info: Connection to Web Socket Server successful

                      2015-10-07T00:30:05.463Z - info: Websocket connection closed. Reason: 1000 Normal connection closure

                      • 8. Re: Arduino sketch error to access librarie <IoTkit.h>
                        Intel_Alvarado

                        Hi,

                         

                        Now that you’ve upgraded to the latest version what error do you see in the Arduino IDE? Is your error still “fatal error: IoTkit.h: No such file or directory”?

                        How did you include the IoTkit library, what method did you follow? The first error is related to not installing the library correctly. In what folder did you include the IoTkit.h file and what other files did you include? The Iotkit library needs calls for other libraries to function correctly, how did you add these libraries?

                         

                        Sergio

                        • 9. Re: Arduino sketch error to access librarie <IoTkit.h>
                          neuberfran

                          Is your error still “fatal error: IoTkit.h: No such file or directory”?

                          Yes


                          How did you include the IoTkit library, what method did you follow?

                          I downloaded the zip file in this link: enableiot/iotkit-samples · GitHub

                           

                          and after I do this: Intel IoT Analytics Dashboard - 12

                           

                           


                          • 10. Re: Arduino sketch error to access librarie <IoTkit.h>
                            neuberfran

                            Thank's Sergio,

                             

                            I solved my problem when I downloaded iotkit-samples-master zip file and put folder iotkit.h folder in C:\Program Files (x86)\Arduino\libraries\IoTkit