2 Replies Latest reply on Sep 29, 2015 5:07 PM by graham_chow

    edison bricked


      I only opened my edison today and found that I can't update the firmware. yes, I have tried manual mode, it does not work because I can't see the drive.


      I can contact it through putty . BUT that is about it.


      I try typing in "reboot ota" and I get

      ash: reboot: not found


      HERE is the boot log. can anyone help?



      PSH KERNEL VERSION: b0182b2b

                      WR: 20104000




      SCU IPC: 0x800000d0  0xfffce92c



      PSH miaHOB version: TNG.B0.VVBD.0000000c



      microkernel built 11:24:08 Feb  5 2015



      ******* PSH loader *******

      PCM page cache size = 192 KB

      Cache Constraint = 0 Pages

      Arming IPC driver ..

      Adding page store pool ..

      PagestoreAddr(IMR Start Address) = 0x04899000

      pageStoreSize(IMR Size)          = 0x00080000


      *** Ready to receive application ***

      U-Boot 2014.04 (Jun 19 2015 - 12:05:55)


             Watchdog enabled

      DRAM:  980.6 MiB

      MMC:   tangier_sdhci: 0

      In:    serial

      Out:   serial

      Err:   serial

      Hit any key to stop autoboot:  0


      Partitioning already done...

      Flashing already done...

      GADGET DRIVER: usb_dnl_dfu

      reading vmlinuz

      5124192 bytes read in 127 ms (38.5 MiB/s)

      Valid Boot Flag

      Setup Size = 0x00003c00

      Magic signature found

      Using boot protocol version 2.0c

      Linux kernel version 3.10.17-poky-edison+ (sys_dswci@ncsndgbuild04) #1 SMP PREEMPT Wed Aug 20 16:09:18 CEST 2014

      Building boot_params at 0x00090000

      Loading bzImage at address 00100000 (5108832 bytes)

      Magic signature found

      Kernel command line: "rootwait root=PARTUUID=012b3303-34ac-284d-99b4-34e03a2335f4 rootfstype=ext4 console=ttyMFD2 earlyprintk=ttyMFD2,keep loglevel=4 g_multi.ethernet_config=rndis systemd.unit=multi-user.target hardware_id=00 g_multi.iSerialNumber=f0e51eda3cd14b7b2c0602565fc6632f g_multi.dev_addr=02:00:86:c6:63:2f platform_mrfld_audio.audio_codec=dummy"


      Starting kernel ...


      [    0.768596] pca953x 1-0020: failed reading register

      [    0.772771] pca953x 1-0021: failed reading register

      [    0.778584] pca953x 1-0022: failed reading register

      [    0.783707] pca953x 1-0023: failed reading register

      [    1.677144] pmic_ccsm pmic_ccsm: Error reading battery profile from battid frmwrk

      [    1.686450] pmic_ccsm pmic_ccsm: Battery Over heat exception


      Welcome to Linux!


      [  OK  ] Reached target Remote File Systems.

               Expecting device dev-ttyMFD2.device...

               Expecting device dev-mmcblk1p1.device...

      [  OK  ] Reached target Paths.

      [  OK  ] Set up automount Arbitrary Executable File Formats F...utomount Point.

      [  OK  ] Reached target Swap.

      [  OK  ] Set up automount boot.automount.

      [  OK  ] Set up automount home.automount.

      [  OK  ] Created slice Root Slice.

      [  OK  ] Listening on Delayed Shutdown Socket.

      [  OK  ] Listening on /dev/initctl Compatibility Named Pipe.

      [  OK  ] Listening on Syslog Socket.

      [  OK  ] Listening on udev Kernel Socket.

      [  OK  ] Listening on udev Control Socket.

      [  OK  ] Created slice User and Session Slice.

      [  OK  ] Listening on Journal Socket.

      [  OK  ] Created slice System Slice.

               Starting Remount Root and Kernel File Systems...

               Starting Load Kernel Modules...

               Starting udev Coldplug all Devices...

               Starting Create list of required static device nodes...rrent kernel...

               Mounting Debug File System...

               Starting Apply Kernel Variables...

               Mounting POSIX Message Queue File System...

      [  OK  ] Created slice system-getty.slice.

      [  OK  ] Created slice system-serial\x2dgetty.slice.

               Starting Journal Service...

      [  OK  ] Started Journal Service.

      [  OK  ] Reached target Slices.

               Mounting Temporary Directory...

      [  OK  ] Set up automount factory.automount.

      [    4.341419] g_multi: Unknown parameter `ethernet_config'

      [  OK  ] Mounted POSIX Message Queue File System.

      [  OK  ] Mounted Debug File System.

      [  OK  ] Mounted Temporary Directory.

      [  OK  ] Started Remount Root and Kernel File Systems.

      [FAILED] Failed to start Load Kernel Modules.

      See 'systemctl status systemd-modules-load.service' for details.

      [  OK  ] Started Create list of required static device nodes ...current kernel.

      [  OK  ] Started Apply Kernel Variables.

      [  OK  ] Started udev Coldplug all Devices.

               Starting Create Static Device Nodes in /dev...

               Mounting FUSE Control File System...

               Mounting Configuration File System...

               Starting Load/Save Random Seed...

      [  OK  ] Mounted Configuration File System.

      [  OK  ] Mounted FUSE Control File System.

      [  OK  ] Started Create Static Device Nodes in /dev.

      [  OK  ] Started Load/Save Random Seed.

               Starting udev Kernel Device Manager...

      [  OK  ] Reached target Local File Systems (Pre).

               Mounting /var/volatile...

      [  OK  ] Started udev Kernel Device Manager.

      [  OK  ] Mounted /var/volatile.

      [  OK  ] Reached target Local File Systems.

               Starting Trigger Flushing of Journal to Persistent Storage...

               Starting Create Volatile Files and Directories...

      [  OK  ] Started Create Volatile Files and Directories.

      [  OK  ] Found device /dev/ttyMFD2.

      [  OK  ] Started Trigger Flushing of Journal to Persistent Storage.

               Starting Network Time Synchronization...

               Starting Update UTMP about System Boot/Shutdown...

      [  OK  ] Created slice system-systemd\x2drfkill.slice.

               Starting Load/Save RF Kill Switch Status of rfkill2...

               Starting Load/Save RF Kill Switch Status of rfkill0...

               Starting Load/Save RF Kill Switch Status of rfkill1...

      [  OK  ] Started Network Time Synchronization.

      [  OK  ] Started Load/Save RF Kill Switch Status of rfkill2.

      [  OK  ] Started Load/Save RF Kill Switch Status of rfkill0.

      [  OK  ] Started Load/Save RF Kill Switch Status of rfkill1.

      [  OK  ] Started Update UTMP about System Boot/Shutdown.

      [  OK  ] Reached target Sound Card.

      [  OK  ] Reached target System Initialization.

      [  OK  ] Reached target Timers.

      [  OK  ] Listening on D-Bus System Message Bus Socket.

      [  OK  ] Listening on sshd.socket.

      [  OK  ] Reached target Sockets.

      [  OK  ] Reached target Basic System.

               Starting Watchdog sample daemon...

      [  OK  ] Started Watchdog sample daemon.

               Starting USB Ethernet gadget...

               Starting Crashlog service...

      [  OK  ] Started Crashlog service.

               Starting Edison RM button handler...

      [  OK  ] Started Edison RM button handler.

               Starting Kernel Logging Service...

      [  OK  ] Started Kernel Logging Service.

               Starting Bluetooth rf kill event daemon...

      [  OK  ] Started Bluetooth rf kill event daemon.

               Starting Daemon to handle arduino sketches...

      [  OK  ] Started Daemon to handle arduino sketches.

               Starting Daemon to reset sketches...

      [  OK  ] Started Daemon to reset sketches.

               Starting System Logging Service...

      [  OK  ] Started System Logging Service.

               Starting Login Service...

               Starting Permit User Sessions...

               Starting D-Bus System Message Bus...

      [  OK  ] Started D-Bus System Message Bus.

               Starting Network Service...

      [  OK  ] Started Permit User Sessions.

      [  OK  ] Started Network Service.

      [  OK  ] Started USB Ethernet gadget.

      [  OK  ] Created slice system-systemd\x2dfsck.slice.

               Starting File System Check on /dev/disk/by-partlabel/factory...

      [  OK  ] Reached target Network.

               Starting Mosquitto - lightweight server implementati...SN protocols...

      [  OK  ] Started Mosquitto - lightweight server implementatio...T-SN protocols.

               Starting Zero-configuration networking...

      [  OK  ] Started Zero-configuration networking.

               Starting Intel_XDK_Daemon...

      [  OK  ] Started Intel_XDK_Daemon.

               Starting Network Name Resolution...

               Starting Getty on tty1...

      [  OK  ] Started Getty on tty1.

               Starting Serial Getty on ttyMFD2...

      [  OK  ] Started Serial Getty on ttyMFD2.

      [  OK  ] Reached target Login Prompts.

               Starting HSU runtime pm service...

      [    9.949555] systemd-fsck[217]: /dev/mmcblk0p5: clean, 13/128 files, 40/1024 blocks

      [  OK  ] Started Network Name Resolution.

      [  OK  ] Started File System Check on /dev/disk/by-partlabel/factory.

      [  OK  ] Started HSU runtime pm service.

      [  OK  ] Started Login Service.

               Mounting /factory...

      [  OK  ] Mounted /factory.



      Poky (Yocto Project Reference Distro) 1.6 edison ttyMFD2



      edison login: ▒͈PD"(Q٭n▒▒▒7▒▒W▒#▒▒▒▒▒▒'▒Ѝ▒▒▒▒▒▒▒.▒▒▒▒'▒▒▒▒▒R*▒▒▒▒▒▒▒:▒▒5▒▒r▒▒▒▒▒▒:▒▒5▒▒r▒▒▒▒▒▒:▒▒▒▒ڳ4▒!▒▒▒uD("▒!!▒▒▒3+▒݈PD"(



                                                            ▒[   67.764538] recv IRQ when we are not startup yet


      Poky (Yocto Project Reference Distro) 1.6 edison ttyMFD2



      edison login:

      Poky (Yocto Project Reference Distro) 1.6 edison ttyMFD2



      edison login: