5 Replies Latest reply on Sep 2, 2015 8:13 PM by adramalech

    Problem with Edison

    adramalech

      Hi so long story short I think I bricked my Edison.  I have tried to troubleshoot it on my own but getting no where fast.  Google searched a bunch of things to look for or try and nothing worked.

       

      I bought my Edison when they first came out with the Arduino Expansion board, had it set up with factory setup and didn't touch it for a while, then I decided to mess around with it and I had recently installed windows 10 on my desktop and this is when I noticed the Edison was unable to be seen on router, was unable to go through the provided IOTDK installer for windows because it couldn't detect the Edison, and was unable even on Linux to be discovered.

       

      I have a brand new 12V 2A power adapter that I plugged in I have the switch towards J16 port and I plugged both USB cables into USB ports on my Desktop running Windows 10.  When I tried to install the FTDI driver it was already installed from Windows so it said I was good.  I saw COM1, communication port, and COM4, USB serial port, ports but nothing for virtual port.  When I use Putty for serial COM4 it will not do anything even after the two enters on the putty terminal.

       

      Another thing I see one solid light on so it indicates to me that it is getting power.  It is like the lights are on and no one is home...

       

      Any help would be greatly appreciated.  I have currently uninstalled everything Intel Edison off of my Win10 desktop.  I have no drivers nothing is connected and Edison IDE is uninstalled to try a clean slate.

       

      **EDIT**  (so i got it working but it was just running on COM4 with hitting double enter on putty and just waiting for it to load the kernel and fail on partition loading)

       

      ******************************

      PSH KERNEL VERSION: b0182b2b

                      WR: 20104000

      ******************************

       

       

      SCU IPC: 0x800000d0  0xfffce92c

       

       

      PSH miaHOB version: TNG.B0.VVBD.0000000c

       

       

      microkernel built 11:24:08 Feb  5 2015

       

       

      ******* PSH loader *******

      PCM page cache size = 192 KB

      Cache Constraint = 0 Pages

      Arming IPC driver ..

      Adding page store pool ..

      PagestoreAddr(IMR Start Address) = 0x04899000

      pageStoreSize(IMR Size)          = 0x00080000

       

       

      *** Ready to receive application ***

       

       

       

       

      U-Boot 2014.04 (Jun 19 2015 - 12:05:55)

       

       

             Watchdog enabled

      DRAM:  980.6 MiB

      MMC:   tangier_sdhci: 0

      In:    serial

      Out:   serial

      Err:   serial

      Hit any key to stop autoboot:  0

      Target:blank

      Partitioning already done...

      Flashing already done...

      GADGET DRIVER: usb_dnl_dfu

      reading vmlinuz

      5434848 bytes read in 134 ms (38.7 MiB/s)

      Valid Boot Flag

      Setup Size = 0x00003c00

      Magic signature found

      Using boot protocol version 2.0c

      Linux kernel version 3.10.17-poky-edison+ (sys_dswci@tlsndgbuild004) #1 SMP PREE                                                                            MPT Fri Jun 19 12:06:40 CEST 2015

      Building boot_params at 0x00090000

      Loading bzImage at address 00100000 (5419488 bytes)

      Magic signature found

      Kernel command line: "rootwait root=PARTUUID=012b3303-34ac-284d-99b4-34e03a2335f                                                                            4 rootfstype=ext4 console=ttyMFD2 earlyprintk=ttyMFD2,keep loglevel=4 g_multi.et                                                                            hernet_config=rndis systemd.unit=multi-user.target hardware_id=00 g_multi.iSeria                                                                            lNumber=b3554e9ce40404acd9a580364ec768b1 g_multi.dev_addr=02:00:86:c7:68:b1 plat                                                                            form_mrfld_audio.audio_codec=dummy"

       

       

      Starting kernel ...

       

       

      [    0.749037] pca953x 1-0020: failed reading register

      [    1.592656] snd_soc_sst_platform: Enter:sst_soc_probe

      [    1.996223] pmic_ccsm pmic_ccsm: Error reading battery profile from battid fr                                                                            mwrk

      [    2.004633] pmic_ccsm pmic_ccsm: Battery Over heat exception

      [    2.004714] pmic_ccsm pmic_ccsm: Battery0 temperature inside boundary

       

       

       

       

      ******************************

      PSH KERNEL VERSION: b0182b2b

                      WR: 20104000

      ******************************

       

       

      SCU IPC: 0x800000d0  0xfffce92c

       

       

      PSH miaHOB version: TNG.B0.VVBD.0000000c

       

       

      microkernel built 11:24:08 Feb  5 2015

       

       

      ******* PSH loader *******

      PCM page cache size = 192 KB

      Cache Constraint = 0 Pages

      Arming IPC driver ..

      Adding page store pool ..

      PagestoreAddr(IMR Start Address) = 0x04899000

      pageStoreSize(IMR Size)          = 0x00080000

       

       

      *** Ready to receive application ***

       

       

       

       

      U-Boot 2014.04 (Jun 19 2015 - 12:05:55)

       

       

             Watchdog enabled

      DRAM:  980.6 MiB

      MMC:   tangier_sdhci: 0

      In:    serial

      Out:   serial

      Err:   serial

      Hit any key to stop autoboot:  0

      Target:blank

      Partitioning already done...

      Flashing already done...

      GADGET DRIVER: usb_dnl_dfu

      reading vmlinuz

      5434848 bytes read in 134 ms (38.7 MiB/s)

      Valid Boot Flag

      Setup Size = 0x00003c00

      Magic signature found

      Using boot protocol version 2.0c

      Linux kernel version 3.10.17-poky-edison+ (sys_dswci@tlsndgbuild004) #1 SMP PREEMPT Fri Jun 19 12:06:40 CEST 2015

      Building boot_params at 0x00090000

      Loading bzImage at address 00100000 (5419488 bytes)

      Magic signature found

      Kernel command line: "rootwait root=PARTUUID=012b3303-34ac-284d-99b4-34e03a2335f4 rootfstype=ext4 console=ttyMFD2 earlyprintk=ttyMFD2,keep loglevel=4 g_multi.ethernet_config=rndis systemd.unit=multi-user.target hardware_id=00 g_multi.iSerialNumber=b3554e9ce40404acd9a580364ec768b1 g_multi.dev_addr=02:00:86:c7:68:b1 platform_mrfld_audio.audio_codec=dummy"

       

       

      Starting kernel ...

       

       

      [    0.757496] pca953x 1-0020: failed reading register

      [    1.602501] snd_soc_sst_platform: Enter:sst_soc_probe

      [    2.006381] pmic_ccsm pmic_ccsm: Error reading battery profile from battid frmwrk

      [    2.024539] pmic_ccsm pmic_ccsm: Battery Over heat exception

      [    2.024608] pmic_ccsm pmic_ccsm: Battery0 temperature inside boundary

      [    2.128050] Kernel panic - not syncing: No init found.  Try passing init= option to kernel. See Linux Documentation/init.txt for guidance.

      [    2.128176] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.17-poky-edison+ #1

      [    2.128240] Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 2015.01.21:18.19.48

      [    2.128311]  00017136 c1bf3700 f6c89f84 c18d9eea f6c89f9c c18d7de4 00000092 c1bf3700

      [    2.128428]  00017136 00000000 f6c89fac c18cb024 c1ac9678 f6c8bf88 f6c88000 c18e4bf7

      [    2.128541]  c18caed0 00000000 00000000 00000000 00000000 00000000 00000000 0000007b

      [    2.128651] Call Trace:

      [    2.128707]  [<c18d9eea>] dump_stack+0x16/0x18

      [    2.128761]  [<c18d7de4>] panic+0x81/0x178

      [    2.128815]  [<c18cb024>] kernel_init+0x154/0x160

      [    2.128870]  [<c18e4bf7>] ret_from_kernel_thread+0x1b/0x28

      [    2.128929]  [<c18caed0>] ? rest_init+0x80/0x80

      [    2.129161] emmc_ipanic: panic notified

      [    2.129199] emmc_ipanic: Crash partition in use!

       

       

       

       

      ******************************

      PSH KERNEL VERSION: b0182b2b

                      WR: 20104000

      ******************************

       

       

      SCU IPC: 0x800000d0  0xfffce92c

       

       

      PSH miaHOB version: TNG.B0.VVBD.0000000c

       

       

      microkernel built 11:24:08 Feb  5 2015

       

       

      ******* PSH loader *******

      PCM page cache size = 192 KB

      Cache Constraint = 0 Pages

      Arming IPC driver ..

      Adding page store pool ..

      PagestoreAddr(IMR Start Address) = 0x04899000

      pageStoreSize(IMR Size)          = 0x00080000

       

       

      *** Ready to receive application ***

        • 1. Re: Problem with Edison
          Intel_Peter

          Hello adramalech,

           

          Have you tried re-flashing the board with the Flash Tool Lite. It might recover your board. You can find the Flash Tool Lite and a guide on how to use it in: IoT - Intel® Edison Board Download | Intel® Developer Zone.

          Try to recover your board this way and let us know what happens.

           

          Peter.

          • 2. Re: Problem with Edison
            adramalech

            So I have tried Ubuntu 14.04.3 using Flash Tool Lite and it didn't work.  Got to 30% and failed.  On windows 10 I get to 7% and it fails, log below the first log.

             

            # Intel® Phone Flash Tool Lite - Logs generated on 2015-08-30T17:55:09

             

            # Intel® Phone Flash Tool Lite V 5.2.4.0 x64 (build on Monday April 27th 2015, 16:15:27 UTC)

             

            # OS: Linux x64 (Ubuntu 14.04.3 LTS)

             

            08/30/15 17:45:22.780 INFO Intel(R) Phone Flash Tool Lite V 5.2.4.0 x64 (build on Monday April 27th 2015, 16:15:27 UTC)

             

            08/30/15 17:45:22.780 INFO Using xFSTK Downloader version: 1.8.0

             

            08/30/15 17:45:22.783 INFO Using DFU Downloader version: 0.8

             

            08/30/15 17:45:22.787 INFO Using Android Debug Bridge version 1.0.32

             

            08/30/15 17:45:22.856 INFO OS version detected: Linux x64 (Ubuntu 14.04.3 LTS)

             

            08/30/15 17:45:22.881 INFO SSL supported: Yes

             

            08/30/15 17:45:22.881 TRACE System PATH: /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/home/adramalech/.rvm/bin

             

            08/30/15 17:45:22.881 TRACE Application path is /usr/bin

             

            08/30/15 17:45:22.881 TRACE Working directory is /home/adramalech

             

            08/30/15 17:45:22.889 TRACE TEMP folder location: '/tmp'

             

            08/30/15 17:45:22.892 INFO Disk space available on /tmp : 417.90 GB

             

            08/30/15 17:45:22.900 INFO Adb and fastboot binaries OK

             

            08/30/15 17:45:25.010 INFO Phone Flash Tool Lite initialized successfully

             

            08/30/15 17:46:46.220 DEBUG Json Flash file parsed (/home/adramalech/Downloads)

             

            08/30/15 17:46:46.221 INFO Ready to flash!

             

            08/30/15 17:46:46.221 DEBUG FlashConfiguration:

             

            name=RNDIS

             

            startState=dnx_fw

             

            brief=RNDIS USB driver (for Windows)

             

            description=U-Boot RNDIS environment

             

            documentation=

             

            id=rndis_env

             

            cmd[0, m=yes, t=no, s=no] Notify '/home/adramalech/Downloads/helper/helper.html'

             

            cmd[1, m=yes, t=42000, s=no] Wait for device with status dnx_fw

             

            cmd[2, m=yes, t=no, s=no] Notify 'Edison board plugged'

             

            cmd[3, m=yes, t=180000, s=no] xFSTK Downloader:

             

              IFWI: /home/adramalech/Downloads/edison_ifwi-dbg-00.bin

             

              IFWI DnX: /home/adramalech/Downloads/edison_dnx_fwr.bin

             

              OS: /home/adramalech/Downloads/u-boot-edison.img

             

              OS DnX: /home/adramalech/Downloads/edison_dnx_osr.bin

             

              GP Flag: 0x80000007

             

            cmd[4, m=yes, t=120000, s=no] Wait for device with status pos

             

            cmd[5, m=yes, t=60000, s=no] dfuDownloader "--verbose" "--alt" "u-boot0" "-D" "/home/adramalech/Downloads/u-boot-edison.bin" "-t" "4096"

             

            cmd[6, m=yes, t=60000, s=no] dfuDownloader "--verbose" "--alt" "u-boot-env0" "-D" "/home/adramalech/Downloads/u-boot-envs/edison-blankrndis.bin" "-t" "4096"

             

            cmd[7, m=yes, t=60000, s=no] dfuDownloader "--verbose" "--alt" "u-boot-env1" "-D" "/home/adramalech/Downloads/u-boot-envs/edison-blankrndis.bin" "-t" "4096" "-R"

             

            cmd[8, m=yes, t=6000, s=no] Sleeping for 6 seconds

             

            cmd[9, m=yes, t=120000, s=no] Wait for device with status pos

             

            cmd[10, m=yes, t=60000, s=no] dfuDownloader "--verbose" "--alt" "boot" "-D" "/home/adramalech/Downloads/edison-image-edison.hddimg" "-t" "4096"

             

            cmd[11, m=yes, t=1200000, s=no] dfuDownloader "--verbose" "--alt" "rootfs" "-D" "/home/adramalech/Downloads/edison-image-edison.ext4" "-t" "4096" "-R"

             

            cmd[12, m=yes, t=no, s=no] Notify 'Edison board needs to reboot<br />

             

              Please do not unplug it for 2 minutes<br /><br />

             

              On Arduino board, led will stop blinking at boot completed<br /><br />

             

              <img src='images/Edison-arduino-blink-led.png' width='390' />'

             

            08/30/15 17:46:46.221 DEBUG Monitoring /home/adramalech/Downloads/FlashEdison.json

             

            08/30/15 17:46:46.221 INFO Flash file /home/adramalech/Downloads/FlashEdison.json [RNDIS] loaded

             

            08/30/15 17:47:06.020 DEBUG Json Flash file parsed (/home/adramalech/Downloads)

             

            08/30/15 17:47:06.020 INFO Ready to flash!

             

            08/30/15 17:47:06.021 DEBUG FlashConfiguration:

             

            name=RNDIS

             

            startState=dnx_fw

             

            brief=RNDIS USB driver (for Windows)

             

            description=U-Boot RNDIS environment

             

            documentation=

             

            id=rndis_env

             

            cmd[0, m=yes, t=no, s=no] Notify '/home/adramalech/Downloads/helper/helper.html'

             

            cmd[1, m=yes, t=42000, s=no] Wait for device with status dnx_fw

             

            cmd[2, m=yes, t=no, s=no] Notify 'Edison board plugged'

             

            cmd[3, m=yes, t=180000, s=no] xFSTK Downloader:

             

              IFWI: /home/adramalech/Downloads/edison_ifwi-dbg-00.bin

             

              IFWI DnX: /home/adramalech/Downloads/edison_dnx_fwr.bin

             

              OS: /home/adramalech/Downloads/u-boot-edison.img

             

              OS DnX: /home/adramalech/Downloads/edison_dnx_osr.bin

             

              GP Flag: 0x80000007

             

            cmd[4, m=yes, t=120000, s=no] Wait for device with status pos

             

            cmd[5, m=yes, t=60000, s=no] dfuDownloader "--verbose" "--alt" "u-boot0" "-D" "/home/adramalech/Downloads/u-boot-edison.bin" "-t" "4096"

             

            cmd[6, m=yes, t=60000, s=no] dfuDownloader "--verbose" "--alt" "u-boot-env0" "-D" "/home/adramalech/Downloads/u-boot-envs/edison-blankrndis.bin" "-t" "4096"

             

            cmd[7, m=yes, t=60000, s=no] dfuDownloader "--verbose" "--alt" "u-boot-env1" "-D" "/home/adramalech/Downloads/u-boot-envs/edison-blankrndis.bin" "-t" "4096" "-R"

             

            cmd[8, m=yes, t=6000, s=no] Sleeping for 6 seconds

             

            cmd[9, m=yes, t=120000, s=no] Wait for device with status pos

             

            cmd[10, m=yes, t=60000, s=no] dfuDownloader "--verbose" "--alt" "boot" "-D" "/home/adramalech/Downloads/edison-image-edison.hddimg" "-t" "4096"

             

            cmd[11, m=yes, t=1200000, s=no] dfuDownloader "--verbose" "--alt" "rootfs" "-D" "/home/adramalech/Downloads/edison-image-edison.ext4" "-t" "4096" "-R"

             

            cmd[12, m=yes, t=no, s=no] Notify 'Edison board needs to reboot<br />

             

              Please do not unplug it for 2 minutes<br /><br />

             

              On Arduino board, led will stop blinking at boot completed<br /><br />

             

              <img src='images/Edison-arduino-blink-led.png' width='390' />'

             

            08/30/15 17:47:06.021 DEBUG Monitoring /home/adramalech/Downloads/FlashEdison.json

             

            08/30/15 17:47:06.021 INFO Flash file /home/adramalech/Downloads/FlashEdison.json [RNDIS] loaded

             

            08/30/15 17:47:10.380 DEBUG FlashConfiguration:

             

            name=RNDIS

             

            startState=dnx_fw

             

            brief=RNDIS USB driver (for Windows)

             

            description=U-Boot RNDIS environment

             

            documentation=

             

            id=rndis_env

             

            cmd[0, m=yes, t=no, s=no] Notify '/home/adramalech/Downloads/helper/helper.html'

             

            cmd[1, m=yes, t=42000, s=no] Wait for device with status dnx_fw

             

            cmd[2, m=yes, t=no, s=no] Notify 'Edison board plugged'

             

            cmd[3, m=yes, t=180000, s=no] xFSTK Downloader:

             

              IFWI: /home/adramalech/Downloads/edison_ifwi-dbg-00.bin

             

              IFWI DnX: /home/adramalech/Downloads/edison_dnx_fwr.bin

             

              OS: /home/adramalech/Downloads/u-boot-edison.img

             

              OS DnX: /home/adramalech/Downloads/edison_dnx_osr.bin

             

              GP Flag: 0x80000007

             

            cmd[4, m=yes, t=120000, s=no] Wait for device with status pos

             

            cmd[5, m=yes, t=60000, s=no] dfuDownloader "--verbose" "--alt" "u-boot0" "-D" "/home/adramalech/Downloads/u-boot-edison.bin" "-t" "4096"

             

            cmd[6, m=yes, t=60000, s=no] dfuDownloader "--verbose" "--alt" "u-boot-env0" "-D" "/home/adramalech/Downloads/u-boot-envs/edison-blankrndis.bin" "-t" "4096"

             

            cmd[7, m=yes, t=60000, s=no] dfuDownloader "--verbose" "--alt" "u-boot-env1" "-D" "/home/adramalech/Downloads/u-boot-envs/edison-blankrndis.bin" "-t" "4096" "-R"

             

            cmd[8, m=yes, t=6000, s=no] Sleeping for 6 seconds

             

            cmd[9, m=yes, t=120000, s=no] Wait for device with status pos

             

            cmd[10, m=yes, t=60000, s=no] dfuDownloader "--verbose" "--alt" "boot" "-D" "/home/adramalech/Downloads/edison-image-edison.hddimg" "-t" "4096"

             

            cmd[11, m=yes, t=1200000, s=no] dfuDownloader "--verbose" "--alt" "rootfs" "-D" "/home/adramalech/Downloads/edison-image-edison.ext4" "-t" "4096" "-R"

             

            cmd[12, m=yes, t=no, s=no] Notify 'Edison board needs to reboot<br />

             

              Please do not unplug it for 2 minutes<br /><br />

             

              On Arduino board, led will stop blinking at boot completed<br /><br />

             

              <img src='images/Edison-arduino-blink-led.png' width='390' />'

             

            08/30/15 17:47:10.380 INFO Flash file /home/adramalech/Downloads/FlashEdison.json [RNDIS] loaded

             

            08/30/15 17:47:10.380 INFO Ready to flash!

             

            08/30/15 17:47:25.412 INFO [Port -1] Starting flash ...

             

            08/30/15 17:47:25.412 INFO [Port -1] Running `Notify '/home/adramalech/Downloads/helper/helper.html'` command

             

            08/30/15 17:47:25.445 INFO Displaying 'file:///home/adramalech/Downloads/helper/helper.html' during 42000 ms

             

            08/30/15 17:47:25.446 INFO [Port -1] Command `Notify '/home/adramalech/Downloads/helper/helper.html'` succeed

             

            08/30/15 17:47:25.446 INFO [Port -1] Running `Wait for device with status dnx_fw on port -1` command

             

            08/30/15 17:47:43.505 INFO [Port 2] Command `Wait for device with status dnx_fw on port -1` succeed

             

            08/30/15 17:47:43.505 INFO [Port 2] Running `Notify 'Edison board plugged'` command

             

            08/30/15 17:47:43.682 INFO Displaying 'Edison board plugged'' during 5000 ms

             

            08/30/15 17:47:43.690 INFO [Port 2] Command `Notify 'Edison board plugged'` succeed

             

            08/30/15 17:47:43.691 INFO [Port 2] Running `"/usr/lib/phoneflashtoollite/xfstkFlashTool" "/home/adramalech/Downloads/edison_dnx_fwr.bin" "/home/adramalech/Downloads/edison_ifwi-dbg-00.bin" "/home/adramalech/Downloads/edison_dnx_osr.bin" "/home/adramalech/Downloads/u-boot-edison.img" "0x80000007" "none" "none"` command

             

            08/30/15 17:47:43.748 INFO [Port 2] Disabling xFSTK Misc DnX

             

            08/30/15 17:47:43.748 INFO [Port 2] Disabling xFSTK wipe out ifwi option

             

            08/30/15 17:47:43.748 INFO [Port 2] Using xFSTK Solo interface (new API)

             

            08/30/15 17:47:43.748 INFO [Port 2] xFSTK Soft Fuse not set

             

            08/30/15 17:47:43.748 INFO [Port 2] XFSTK Downloader API 1.8.0

             

            08/30/15 17:47:43.748 INFO [Port 2] Copyright (c) 2015 Intel Corporation

             

            08/30/15 17:47:43.748 INFO [Port 2] fwdnx -- /home/adramalech/Downloads/edison_dnx_fwr.bin

             

            08/30/15 17:47:43.748 INFO [Port 2] fwimage -- /home/adramalech/Downloads/edison_ifwi-dbg-00.bin

             

            08/30/15 17:47:43.748 INFO [Port 2] osdnx -- /home/adramalech/Downloads/edison_dnx_osr.bin

             

            08/30/15 17:47:43.748 INFO [Port 2] osimage -- /home/adramalech/Downloads/u-boot-edison.img

             

            08/30/15 17:47:43.748 INFO [Port 2] gpflags -- 0x80000007

             

            08/30/15 17:47:43.748 INFO [Port 2] softfuse --

             

            08/30/15 17:47:44.273 INFO [Port 2] ....XFSTK-LOG--virtual bool MerrifieldDownloader::SetDevice(IGenericDevice*)

             

            08/30/15 17:47:44.273 INFO [Port 2] Initiating download...

             

            08/30/15 17:47:44.273 DEBUG [Port 2] XFSTK-LOG--virtual bool MerrifieldDownloader::UpdateTarget()

             

            08/30/15 17:47:44.273 DEBUG [Port 2] XFSTK-LOG--FWDnxPath -- /home/adramalech/Downloads/edison_dnx_fwr.bin

             

            08/30/15 17:47:44.273 DEBUG [Port 2] XFSTK-LOG--FWImagePath -- /home/adramalech/Downloads/edison_ifwi-dbg-00.bin

             

            08/30/15 17:47:44.273 DEBUG [Port 2] XFSTK-LOG--OSDnxPath -- /home/adramalech/Downloads/edison_dnx_osr.bin

             

            08/30/15 17:47:44.273 DEBUG [Port 2] XFSTK-LOG--OSImagePath -- /home/adramalech/Downloads/u-boot-edison.img

             

            08/30/15 17:47:44.273 DEBUG [Port 2] XFSTK-LOG--MiscDnxPath -- /home/adramalech/Downloads/edison_dnx_fwr.bin

             

            08/30/15 17:47:44.273 DEBUG [Port 2] XFSTK-LOG--MiscBinPath -- BLANK.bin

             

            08/30/15 17:47:44.273 DEBUG [Port 2] XFSTK-LOG--Gpflags -- 80000007

             

            08/30/15 17:47:44.273 DEBUG [Port 2] XFSTK-LOG--DebugLevel -- ffffffff

             

            08/30/15 17:47:44.273 DEBUG [Port 2] XFSTK-LOG--UsbDelay ms -- 0

             

            08/30/15 17:47:44.273 DEBUG [Port 2] XFSTK-LOG--TransferType -- USB

             

            08/30/15 17:47:44.273 DEBUG [Port 2] XFSTK-LOG--WipeIFWI -- False

             

            08/30/15 17:47:44.273 DEBUG [Port 2] XFSTK-LOG--Idrq -- False

             

            08/30/15 17:47:44.273 DEBUG [Port 2] XFSTK-LOG--Verbose -- True

             

            08/30/15 17:47:44.273 DEBUG [Port 2] XFSTK-LOG--void MerrifieldDownloader::Init()

             

            08/30/15 17:47:44.273 DEBUG [Port 2] XFSTK-LOG--virtual bool MerrifieldUSB20Device::Open()

             

            08/30/15 17:47:44.273 DEBUG [Port 2] XFSTK-LOG--USB Device found - Externally Specified for MT

             

            08/30/15 17:47:44.273 DEBUG [Port 2] XFSTK-LOG--USB Device Handle - 104eaa0

             

            08/30/15 17:47:44.273 DEBUG [Port 2] XFSTK-LOG--USB dev_handle -- 1035e50

             

            08/30/15 17:47:44.276 DEBUG [Port 2] XFSTK-LOG--USBSN: 2BC5863287F8C15CEA1B190F981F3F3E

             

            08/30/15 17:47:44.276 DEBUG [Port 2] XFSTK-LOG--Bulk OUT endpoint in : 0x01

             

            08/30/15 17:47:44.276 DEBUG [Port 2] XFSTK-LOG--Bulk IN endpoint in : 0x81

             

            08/30/15 17:47:44.276 DEBUG [Port 2] XFSTK-LOG--void MerrifieldDownloader::do_update(MerrifieldOptions*)

             

            08/30/15 17:47:44.276 DEBUG [Port 2] XFSTK-LOG--Start

             

            08/30/15 17:47:44.276 DEBUG [Port 2] XFSTK-LOG--Sending DnER...

             

            08/30/15 17:47:44.276 DEBUG [Port 2] XFSTK-LOG--WriteOutPipe DnER

             

            08/30/15 17:47:44.276 DEBUG [Port 2] XFSTK-LOG--WriteOutPipe 0

             

            08/30/15 17:47:44.276 DEBUG [Port 2] XFSTK-LOG--virtual bool MerrifieldUSB20Device::Write(void*, unsigned int) --->DnER

             

            08/30/15 17:47:44.276 DEBUG [Port 2] XFSTK-LOG--GetOpCode

             

            08/30/15 17:47:44.276 DEBUG [Port 2] XFSTK-LOG--ReadInAck

             

            08/30/15 17:47:44.277 DEBUG [Port 2] XFSTK-LOG--GetAck - DORM(4)

             

            08/30/15 17:47:44.277 DEBUG [Port 2] XFSTK-LOG--OS: Handle OS download...

             

            08/30/15 17:47:44.277 DEBUG [Port 2] XFSTK-LOG--LogProgress

             

            08/30/15 17:47:44.277 DEBUG [Port 2] XFSTK-PROGRESS--11

             

            08/30/15 17:47:44.277 DEBUG [Port 2] XFSTK-LOG--GetOpCode

             

            08/30/15 17:47:44.277 DEBUG [Port 2] XFSTK-LOG--Changing to DLDR_STATE_OS_NORMAL ...

             

            08/30/15 17:47:44.277 DEBUG [Port 2] XFSTK-LOG--CheckFile

             

            08/30/15 17:47:44.277 DEBUG [Port 2] XFSTK-LOG--_num OS Images : 1

             

            08/30/15 17:47:44.277 DEBUG [Port 2] XFSTK-LOG--_temp_data : 3000

             

            08/30/15 17:47:44.277 DEBUG [Port 2] XFSTK-LOG--OSII: 0 Data Size: 6291456

             

            08/30/15 17:47:44.277 DEBUG [Port 2] XFSTK-LOG--_Temp Data is: 3000 h

             

            08/30/15 17:47:44.277 DEBUG [Port 2] XFSTK-LOG--InitOsipHdr

             

            08/30/15 17:47:44.278 DEBUG [Port 2] XFSTK-LOG--Init OSIP header ...

             

            08/30/15 17:47:44.278 DEBUG [Port 2] XFSTK-LOG--_After fread osip_hdr

             

            08/30/15 17:47:44.278 DEBUG [Port 2] XFSTK-LOG--CheckFile

             

            08/30/15 17:47:44.278 DEBUG [Port 2] XFSTK-LOG--InitOsDnX

             

            08/30/15 17:47:44.278 DEBUG [Port 2] XFSTK-LOG--/home/adramalech/Downloads/edison_dnx_osr.bin size:148996 bytes

             

            08/30/15 17:47:44.278 INFO [Port 2] XFSTK-STATUS--POS download is in progress ...

             

            08/30/15 17:47:44.278 DEBUG [Port 2] XFSTK-LOG--StartOs

             

            08/30/15 17:47:44.278 DEBUG [Port 2] XFSTK-LOG--sending 6 DWORDS of DnxOS size and checksum...

             

            08/30/15 17:47:44.278 DEBUG [Port 2] XFSTK-LOG--GetOsDnXHdr

             

            08/30/15 17:47:44.279 DEBUG [Port 2] XFSTK-LOG--/home/adramalech/Downloads/edison_dnx_osr.bin size:148996 bytes

             

            08/30/15 17:47:44.279 DEBUG [Port 2] XFSTK-LOG--WriteOutPipe #F#

             

            08/30/15 17:47:44.279 DEBUG [Port 2] XFSTK-LOG--WriteOutPipe 0

             

            08/30/15 17:47:44.279 DEBUG [Port 2] XFSTK-LOG--virtual bool MerrifieldUSB20Device::Write(void*, unsigned int) --->#F#

             

            08/30/15 17:47:44.279 DEBUG [Port 2] XFSTK-LOG--LogProgress

             

            08/30/15 17:47:44.279 DEBUG [Port 2] XFSTK-PROGRESS--22

             

            08/30/15 17:47:44.279 DEBUG [Port 2] XFSTK-LOG--End of MrfdStHandleOsNormal

             

            08/30/15 17:47:44.279 DEBUG [Port 2] XFSTK-LOG--LogProgress

             

            08/30/15 17:47:44.279 DEBUG [Port 2] XFSTK-PROGRESS--33

             

            08/30/15 17:47:44.279 DEBUG [Port 2] XFSTK-LOG--GetOpCode

             

            08/30/15 17:47:44.279 DEBUG [Port 2] XFSTK-LOG--ReadInAck

             

            08/30/15 17:47:44.280 DEBUG [Port 2] XFSTK-LOG--GetAck - DXBL(4)

             

            08/30/15 17:47:44.280 DEBUG [Port 2] XFSTK-LOG--OS: Sending DnX ...

             

            08/30/15 17:47:44.280 DEBUG [Port 2] XFSTK-LOG--OsDXBL

             

            08/30/15 17:47:44.280 DEBUG [Port 2] XFSTK-LOG--LogProgress

             

            08/30/15 17:47:44.280 DEBUG [Port 2] XFSTK-PROGRESS--44

             

            08/30/15 17:47:44.280 DEBUG [Port 2] XFSTK-LOG--GetOsDnX

             

            08/30/15 17:47:44.280 DEBUG [Port 2] XFSTK-LOG--WriteOutPipe __BINARY__

             

            08/30/15 17:47:44.280 DEBUG [Port 2] XFSTK-LOG--WriteOutPipe 0

             

            08/30/15 17:47:44.281 DEBUG [Port 2] XFSTK-LOG--virtual bool MerrifieldUSB20Device::Write(void*, unsigned int) --->__BINARY__

             

            08/30/15 17:47:44.284 DEBUG [Port 2] XFSTK-LOG--LogProgress

             

            08/30/15 17:47:44.284 DEBUG [Port 2] XFSTK-PROGRESS--55

             

            08/30/15 17:47:44.284 DEBUG [Port 2] XFSTK-LOG--GetOpCode

             

            08/30/15 17:47:44.284 DEBUG [Port 2] XFSTK-LOG--ReadInAck

             

            08/30/15 17:47:44.322 DEBUG [Port 2] XFSTK-LOG--GetAck - ROSIP$$$(8)

             

            08/30/15 17:47:44.322 DEBUG [Port 2] XFSTK-LOG--GetOsipHdr

             

            08/30/15 17:47:44.322 DEBUG [Port 2] XFSTK-LOG--Get OSIP header + Partion Table...

             

            08/30/15 17:47:44.322 DEBUG [Port 2] XFSTK-LOG--sending OSIP...

             

            08/30/15 17:47:44.322 DEBUG [Port 2] XFSTK-LOG--sending OSIP header + Partion Table...

             

            08/30/15 17:47:44.322 DEBUG [Port 2] XFSTK-LOG--WriteOutPipe __BINARY__

             

            08/30/15 17:47:44.322 DEBUG [Port 2] XFSTK-LOG--WriteOutPipe 0

             

            08/30/15 17:47:44.322 DEBUG [Port 2] XFSTK-LOG--virtual bool MerrifieldUSB20Device::Write(void*, unsigned int) --->__BINARY__

             

            08/30/15 17:47:44.322 DEBUG [Port 2] XFSTK-LOG--LogProgress

             

            08/30/15 17:47:44.322 DEBUG [Port 2] XFSTK-PROGRESS--66

             

            08/30/15 17:47:44.322 DEBUG [Port 2] XFSTK-LOG--GetOpCode

             

            08/30/15 17:47:44.322 DEBUG [Port 2] XFSTK-LOG--ReadInAck

             

            08/30/15 17:47:44.324 DEBUG [Port 2] XFSTK-LOG--RIMGBuff: 12288

             

            08/30/15 17:47:44.324 DEBUG [Port 2] XFSTK-LOG--RIMG, 0, 4, RIMGChunkSize: 12288

             

            08/30/15 17:47:44.324 DEBUG [Port 2] XFSTK-LOG--GetAck - RIMG(12)

             

            08/30/15 17:47:44.324 DEBUG [Port 2] XFSTK-LOG--GetOsImageDataChunk

             

            08/30/15 17:47:44.324 DEBUG [Port 2] XFSTK-LOG--GetOsImageDataChunk

             

            08/30/15 17:47:44.324 DEBUG [Port 2] XFSTK-LOG--Get OS image data...

             

            08/30/15 17:47:44.324 DEBUG [Port 2] XFSTK-LOG--RIMGChunkSize is : 12288

             

            08/30/15 17:47:44.324 DEBUG [Port 2] XFSTK-LOG--OS Data Size is : 6291456

             

            08/30/15 17:47:44.324 DEBUG [Port 2] XFSTK-LOG--allocating buffer for data to send...data size: 6291456

             

            08/30/15 17:47:44.324 DEBUG [Port 2] XFSTK-LOG--reading data from file

             

            08/30/15 17:47:44.326 DEBUG [Port 2] XFSTK-LOG--data size to read: 6291456

             

            08/30/15 17:47:44.326 DEBUG [Port 2] XFSTK-LOG--OS: Bytes left to send: 0

             

            08/30/15 17:47:44.326 DEBUG [Port 2] XFSTK-LOG--sending data to USB...

             

            08/30/15 17:47:44.326 DEBUG [Port 2] XFSTK-LOG--WriteOutPipe __BINARY__

             

            08/30/15 17:47:44.326 DEBUG [Port 2] XFSTK-LOG--WriteOutPipe 0

             

            08/30/15 17:47:44.326 DEBUG [Port 2] XFSTK-LOG--virtual bool MerrifieldUSB20Device::Write(void*, unsigned int) --->__BINARY__

             

            08/30/15 17:47:44.709 DEBUG [Port 2] XFSTK-LOG--ReleaseOsImageDataChunk

             

            08/30/15 17:47:44.709 DEBUG [Port 2] XFSTK-LOG--End of RIMG

             

            08/30/15 17:47:44.709 DEBUG [Port 2] XFSTK-LOG--LogProgress

             

            08/30/15 17:47:44.710 DEBUG [Port 2] XFSTK-PROGRESS--77

             

            08/30/15 17:47:44.710 DEBUG [Port 2] XFSTK-LOG--GetOpCode

             

            08/30/15 17:47:44.710 DEBUG [Port 2] XFSTK-LOG--ReadInAck

             

            08/30/15 17:47:45.531 DEBUG [Port 2] XFSTK-LOG--GetAck - EOIU(12)

             

            08/30/15 17:47:45.531 DEBUG [Port 2] XFSTK-LOG--EOIU Received...

             

            08/30/15 17:47:45.531 DEBUG [Port 2] XFSTK-LOG--sending DFN...

             

            08/30/15 17:47:45.531 DEBUG [Port 2] XFSTK-LOG--WriteOutPipe DFN

             

            08/30/15 17:47:45.531 DEBUG [Port 2] XFSTK-LOG--WriteOutPipe 0

             

            08/30/15 17:47:45.531 DEBUG [Port 2] XFSTK-LOG--virtual bool MerrifieldUSB20Device::Write(void*, unsigned int) --->DFN

             

            08/30/15 17:47:45.531 DEBUG [Port 2] XFSTK-LOG--OS: Operating system download completed.

             

            08/30/15 17:47:47.531 DEBUG [Port 2] XFSTK-LOG--LogProgress

             

            08/30/15 17:47:47.531 DEBUG [Port 2] XFSTK-PROGRESS--88

             

            08/30/15 17:47:47.531 DEBUG [Port 2] XFSTK-LOG--LogProgress

             

            08/30/15 17:47:47.531 DEBUG [Port 2] XFSTK-PROGRESS--100

             

            08/30/15 17:47:47.531 DEBUG [Port 2] XFSTK-LOG--LogError

             

            08/30/15 17:47:47.531 INFO [Port 2] XFSTK-STATUS--Error Code: 0 - Success

             

            08/30/15 17:47:47.531 DEBUG [Port 2] XFSTK-LOG--void MerrifieldDownloader::do_abort()

             

            08/30/15 17:47:47.531 DEBUG [Port 2] XFSTK-LOG--virtual bool MerrifieldUSB20Device::Abort()

             

            08/30/15 17:47:47.531 DEBUG [Port 2] XFSTK-LOG--/home/adramalech/Downloads/edison_ifwi-dbg-00.bin size:4194468 bytes

             

            08/30/15 17:47:47.531 INFO [Port 2] XFSTK-STATUS--Firmware and OS download completed.

             

            08/30/15 17:47:47.531 DEBUG [Port 2] XFSTK-LOG--virtual bool MerrifieldDownloader::GetStatus()

             

            08/30/15 17:47:47.531 INFO [Port 2] XFSTK: Transfer Completed Successfully.

             

            08/30/15 17:47:47.531 INFO [Port 2] Success: Download of FW Completed.

             

            08/30/15 17:47:47.532 INFO [Port 2] xfstkFlashTool exited with success

             

            08/30/15 17:47:47.532 INFO [Port 2] Command `"/usr/lib/phoneflashtoollite/xfstkFlashTool" "/home/adramalech/Downloads/edison_dnx_fwr.bin" "/home/adramalech/Downloads/edison_ifwi-dbg-00.bin" "/home/adramalech/Downloads/edison_dnx_osr.bin" "/home/adramalech/Downloads/u-boot-edison.img" "0x80000007" "none" "none"` succeed

             

            08/30/15 17:47:47.532 INFO [Port 2] Running `Wait for device with status pos on port 2` command

             

            08/30/15 17:49:47.532 ERROR [Port 2] Command `Wait for device with status pos on port 2` failed

             

            08/30/15 17:49:47.532 ERROR [Port 2] Flash failed (Command type: Device enumeration)

             

            08/30/15 17:49:47.534 TRACE Sending system tray notification: "Flash failed"

             

             

            On windows:

             

            08/30/15 18:03:42.860 INFO : Intel(R) Phone Flash Tool Lite V 5.2.4.0 x86 (build on Monday April 27th 2015, 16:29:59 UTC)

            08/30/15 18:03:42.860 INFO : Using xFSTK Downloader version: 1.8.0

            08/30/15 18:03:42.901 INFO : Using DFU Downloader version: 0.8-msvc

            08/30/15 18:03:43.020 INFO : Using Android Debug Bridge version 1.0.32

            08/30/15 18:03:43.021 INFO : OS version detected: Windows 8.1 (x64)

            08/30/15 18:03:44.079 INFO : SSL supported: Yes

            08/30/15 18:03:44.079 TRACE : System PATH: C:\ProgramData\Oracle\Java\javapath;C:\Python34\Scripts;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Git\cmd;C:\Program Files (x86)\Git\bin;C:\Program Files (x86)\Calibre2\;C:\Program Files (x86)\Subversion\bin;C:\Python27;C:\Program Files (x86)\NVIDIA Corporation\PhysX\Common;C:\Program Files (x86)\Skype\Phone\;C:\Users\Jonathan\activator-1.3.5-minimal;C:\WINDOWS\system32\config\systemprofile\.dnx\bin;C:\Program Files\Microsoft DNX\Dnvm\;C:\Program Files\Microsoft SQL Server\120\Tools\Binn\;C:\Program Files\nodejs\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Intel\Phone Flash Tool Lite;C:\Users\Jonathan\AppData\Roaming\npm;C:\Users\Jonathan\AppData\Local\Code\bin;C:\Users\Jonathan\AppData\Local\.meteor\

            08/30/15 18:03:44.079 TRACE : Application path is C:/Program Files (x86)/Intel/Phone Flash Tool Lite

            08/30/15 18:03:44.079 TRACE : Working directory is C:/Program Files (x86)/Intel/Phone Flash Tool Lite

            08/30/15 18:03:48.122 TRACE : TEMP folder location: drive C:/ ('C:/Users/Jonathan/AppData/Local/Temp')

            08/30/15 18:03:48.123 INFO : Disk space available on drive C:/ : 3.31 GB

            08/30/15 18:03:48.193 INFO : Adb and fastboot binaries OK

            08/30/15 18:03:48.421 INFO : Phone Flash Tool Lite initialized successfully

            08/30/15 18:03:55.405 DEBUG : Json Flash file parsed (C:/Users/Jonathan/Downloads/edison-image-ww25.5-15)

            08/30/15 18:03:55.562 INFO : Ready to flash!

            08/30/15 18:03:55.564 DEBUG : FlashConfiguration:

            name=RNDIS

            startState=dnx_fw

            brief=RNDIS USB driver (for Windows)

            description=U-Boot RNDIS environment

            documentation=

            id=rndis_env

            cmd[0, m=yes, t=no, s=no] Notify 'C:\Users\Jonathan\Downloads\edison-image-ww25.5-15\helper\helper.html'

            cmd[1, m=yes, t=42000, s=no] Wait for device with status dnx_fw

            cmd[2, m=yes, t=no, s=no] Notify 'Edison board plugged'

            cmd[3, m=yes, t=180000, s=no] xFSTK Downloader:

              IFWI: C:\Users\Jonathan\Downloads\edison-image-ww25.5-15\edison_ifwi-dbg-00.bin

              IFWI DnX: C:\Users\Jonathan\Downloads\edison-image-ww25.5-15\edison_dnx_fwr.bin

              OS: C:\Users\Jonathan\Downloads\edison-image-ww25.5-15\u-boot-edison.img

              OS DnX: C:\Users\Jonathan\Downloads\edison-image-ww25.5-15\edison_dnx_osr.bin

              GP Flag: 0x80000007

            cmd[4, m=yes, t=120000, s=no] Wait for device with status pos

            cmd[5, m=yes, t=60000, s=no] dfuDownloader "--verbose" "--alt" "u-boot0" "-D" "C:\Users\Jonathan\Downloads\edison-image-ww25.5-15\u-boot-edison.bin" "-t" "4096"

            cmd[6, m=yes, t=60000, s=no] dfuDownloader "--verbose" "--alt" "u-boot-env0" "-D" "C:\Users\Jonathan\Downloads\edison-image-ww25.5-15\u-boot-envs\edison-blankrndis.bin" "-t" "4096"

            cmd[7, m=yes, t=60000, s=no] dfuDownloader "--verbose" "--alt" "u-boot-env1" "-D" "C:\Users\Jonathan\Downloads\edison-image-ww25.5-15\u-boot-envs\edison-blankrndis.bin" "-t" "4096" "-R"

            cmd[8, m=yes, t=6000, s=no] Sleeping for 6 seconds

            cmd[9, m=yes, t=120000, s=no] Wait for device with status pos

            cmd[10, m=yes, t=60000, s=no] dfuDownloader "--verbose" "--alt" "boot" "-D" "C:\Users\Jonathan\Downloads\edison-image-ww25.5-15\edison-image-edison.hddimg" "-t" "4096"

            cmd[11, m=yes, t=1200000, s=no] dfuDownloader "--verbose" "--alt" "rootfs" "-D" "C:\Users\Jonathan\Downloads\edison-image-ww25.5-15\edison-image-edison.ext4" "-t" "4096" "-R"

            cmd[12, m=yes, t=no, s=no] Notify 'Edison board needs to reboot<br />

              Please do not unplug it for 2 minutes<br /><br />

              On Arduino board, led will stop blinking at boot completed<br /><br />

              <img src='images/Edison-arduino-blink-led.png' width='390' />'

            08/30/15 18:03:55.564 DEBUG : Monitoring C:\Users\Jonathan\Downloads\edison-image-ww25.5-15\FlashEdison.json

            08/30/15 18:03:55.565 INFO : Flash file C:\Users\Jonathan\Downloads\edison-image-ww25.5-15\FlashEdison.json [RNDIS] loaded

            08/30/15 18:03:56.884 INFO : [Port 1/2] Start flashing the flash configuration with dnx_fw start state for

            08/30/15 18:03:56.884 DEBUG : Automatic reboot is not supported on this device

            08/30/15 18:03:56.884 INFO : [Port 1/2] Starting flash ...

            08/30/15 18:03:56.885 INFO : [Port 1/2] Running `Notify 'C:\Users\Jonathan\Downloads\edison-image-ww25.5-15\helper\helper.html'` command

            08/30/15 18:03:57.314 INFO : Displaying 'file:///C:/Users/Jonathan/Downloads/edison-image-ww25.5-15/helper/helper.html' during 42000 ms

            08/30/15 18:03:57.336 INFO : [Port 1/2] Command `Notify 'C:\Users\Jonathan\Downloads\edison-image-ww25.5-15\helper\helper.html'` succeed

            08/30/15 18:03:57.336 INFO : [Port 1/2] Running `Wait for device with status dnx_fw on port 1/2` command

            08/30/15 18:04:11.314 INFO : [Port 1/2] Command `Wait for device with status dnx_fw on port 1/2` succeed

            08/30/15 18:04:11.314 INFO : [Port 1/2] Running `Notify 'Edison board plugged'` command

            08/30/15 18:04:11.387 INFO : Displaying 'Edison board plugged'' during 5000 ms

            08/30/15 18:04:11.391 INFO : [Port 1/2] Command `Notify 'Edison board plugged'` succeed

            08/30/15 18:04:11.391 INFO : [Port 1/2] Running `"xfstkFlashTool.exe" "C:\Users\Jonathan\Downloads\edison-image-ww25.5-15\edison_dnx_fwr.bin" "C:\Users\Jonathan\Downloads\edison-image-ww25.5-15\edison_ifwi-dbg-00.bin" "C:\Users\Jonathan\Downloads\edison-image-ww25.5-15\edison_dnx_osr.bin" "C:\Users\Jonathan\Downloads\edison-image-ww25.5-15\u-boot-edison.img" "0x80000007" "none" "none"` command

            08/30/15 18:04:11.453 INFO : [Port 1/2] Disabling xFSTK Misc DnX

            08/30/15 18:04:11.453 INFO : [Port 1/2] Disabling xFSTK wipe out ifwi option

            08/30/15 18:04:11.453 INFO : [Port 1/2] Using xFSTK Solo interface (new API)

            08/30/15 18:04:11.453 INFO : [Port 1/2] xFSTK Soft Fuse not set

            08/30/15 18:04:11.453 INFO : [Port 1/2] XFSTK Downloader API 1.8.0

            08/30/15 18:04:11.453 INFO : [Port 1/2] Copyright (c) 2015 Intel Corporation

            08/30/15 18:04:11.453 INFO : [Port 1/2] fwdnx -- C:\Users\Jonathan\Downloads\edison-image-ww25.5-15\edison_dnx_fwr.bin

            08/30/15 18:04:11.453 INFO : [Port 1/2] fwimage -- C:\Users\Jonathan\Downloads\edison-image-ww25.5-15\edison_ifwi-dbg-00.bin

            08/30/15 18:04:11.453 INFO : [Port 1/2] osdnx -- C:\Users\Jonathan\Downloads\edison-image-ww25.5-15\edison_dnx_osr.bin

            08/30/15 18:04:11.453 INFO : [Port 1/2] osimage -- C:\Users\Jonathan\Downloads\edison-image-ww25.5-15\u-boot-edison.img

            08/30/15 18:04:11.453 INFO : [Port 1/2] gpflags -- 0x80000007

            08/30/15 18:04:11.453 INFO : [Port 1/2] softfuse --

            08/30/15 18:04:11.453 INFO : [Port 1/2] Qt: Untested Windows version 6.3 detected!

            08/30/15 18:04:11.912 ERROR : [Port 1/2] Command `"xfstkFlashTool.exe" "C:\Users\Jonathan\Downloads\edison-image-ww25.5-15\edison_dnx_fwr.bin" "C:\Users\Jonathan\Downloads\edison-image-ww25.5-15\edison_ifwi-dbg-00.bin" "C:\Users\Jonathan\Downloads\edison-image-ww25.5-15\edison_dnx_osr.bin" "C:\Users\Jonathan\Downloads\edison-image-ww25.5-15\u-boot-edison.img" "0x80000007" "none" "none"` failed

            08/30/15 18:04:11.912 ERROR : [Port 1/2] Flash failed (Command type: Ifwi)

            08/30/15 18:04:12.117 TRACE : Sending system tray notification: "Flash failed"

            08/30/15 18:04:21.493 INFO : [Port 1/2] Start flashing the flash configuration with dnx_fw start state for 2BC5863287F8C15CEA1B190F981F3F3E

            08/30/15 18:04:21.493 DEBUG : Automatic reboot is not supported on this device

            08/30/15 18:04:21.493 INFO : [Port 1/2] Starting flash ...

            08/30/15 18:04:21.493 INFO : [Port 1/2] Running `Notify 'C:\Users\Jonathan\Downloads\edison-image-ww25.5-15\helper\helper.html'` command

            08/30/15 18:04:21.925 INFO : Displaying 'file:///C:/Users/Jonathan/Downloads/edison-image-ww25.5-15/helper/helper.html' during 42000 ms

            08/30/15 18:04:21.947 INFO : [Port 1/2] Command `Notify 'C:\Users\Jonathan\Downloads\edison-image-ww25.5-15\helper\helper.html'` succeed

            08/30/15 18:04:21.947 INFO : [Port 1/2] Running `Wait for device with status dnx_fw on port 1/2` command

            08/30/15 18:04:21.947 INFO : [Port 1/2] Command `Wait for device with status dnx_fw on port 1/2` succeed

            08/30/15 18:04:21.947 INFO : [Port 1/2] Running `Notify 'Edison board plugged'` command

            08/30/15 18:04:22.154 INFO : Displaying 'Edison board plugged'' during 5000 ms

            08/30/15 18:04:22.155 INFO : [Port 1/2] Command `Notify 'Edison board plugged'` succeed

            08/30/15 18:04:22.155 INFO : [Port 1/2] Running `"xfstkFlashTool.exe" "C:\Users\Jonathan\Downloads\edison-image-ww25.5-15\edison_dnx_fwr.bin" "C:\Users\Jonathan\Downloads\edison-image-ww25.5-15\edison_ifwi-dbg-00.bin" "C:\Users\Jonathan\Downloads\edison-image-ww25.5-15\edison_dnx_osr.bin" "C:\Users\Jonathan\Downloads\edison-image-ww25.5-15\u-boot-edison.img" "0x80000007" "none" "none"` command

            08/30/15 18:04:22.178 INFO : [Port 1/2] Disabling xFSTK Misc DnX

            08/30/15 18:04:22.178 INFO : [Port 1/2] Disabling xFSTK wipe out ifwi option

            08/30/15 18:04:22.178 INFO : [Port 1/2] Using xFSTK Solo interface (new API)

            08/30/15 18:04:22.178 INFO : [Port 1/2] xFSTK Soft Fuse not set

            08/30/15 18:04:22.178 INFO : [Port 1/2] XFSTK Downloader API 1.8.0

            08/30/15 18:04:22.178 INFO : [Port 1/2] Copyright (c) 2015 Intel Corporation

            08/30/15 18:04:22.178 INFO : [Port 1/2] fwdnx -- C:\Users\Jonathan\Downloads\edison-image-ww25.5-15\edison_dnx_fwr.bin

            08/30/15 18:04:22.178 INFO : [Port 1/2] fwimage -- C:\Users\Jonathan\Downloads\edison-image-ww25.5-15\edison_ifwi-dbg-00.bin

            08/30/15 18:04:22.178 INFO : [Port 1/2] osdnx -- C:\Users\Jonathan\Downloads\edison-image-ww25.5-15\edison_dnx_osr.bin

            08/30/15 18:04:22.178 INFO : [Port 1/2] osimage -- C:\Users\Jonathan\Downloads\edison-image-ww25.5-15\u-boot-edison.img

            08/30/15 18:04:22.178 INFO : [Port 1/2] gpflags -- 0x80000007

            08/30/15 18:04:22.178 INFO : [Port 1/2] softfuse --

            08/30/15 18:04:22.178 INFO : [Port 1/2] Qt: Untested Windows version 6.3 detected!

            08/30/15 18:04:22.534 ERROR : [Port 1/2] Command `"xfstkFlashTool.exe" "C:\Users\Jonathan\Downloads\edison-image-ww25.5-15\edison_dnx_fwr.bin" "C:\Users\Jonathan\Downloads\edison-image-ww25.5-15\edison_ifwi-dbg-00.bin" "C:\Users\Jonathan\Downloads\edison-image-ww25.5-15\edison_dnx_osr.bin" "C:\Users\Jonathan\Downloads\edison-image-ww25.5-15\u-boot-edison.img" "0x80000007" "none" "none"` failed

            08/30/15 18:04:22.534 ERROR : [Port 1/2] Flash failed (Command type: Ifwi)

            08/30/15 18:04:22.738 TRACE : Sending system tray notification: "Flash failed"

            08/30/15 18:05:59.551 INFO : [Port 1/2] Start flashing the flash configuration with dnx_fw start state for

            08/30/15 18:05:59.551 DEBUG : Automatic reboot is not supported on this device

            08/30/15 18:05:59.551 INFO : [Port 1/2] Starting flash ...

            08/30/15 18:05:59.551 INFO : [Port 1/2] Running `Notify 'C:\Users\Jonathan\Downloads\edison-image-ww25.5-15\helper\helper.html'` command

            08/30/15 18:05:59.982 INFO : Displaying 'file:///C:/Users/Jonathan/Downloads/edison-image-ww25.5-15/helper/helper.html' during 42000 ms

            08/30/15 18:06:00.004 INFO : [Port 1/2] Command `Notify 'C:\Users\Jonathan\Downloads\edison-image-ww25.5-15\helper\helper.html'` succeed

            08/30/15 18:06:00.004 INFO : [Port 1/2] Running `Wait for device with status dnx_fw on port 1/2` command

            08/30/15 18:06:42.004 ERROR : [Port 1/2] Command `Wait for device with status dnx_fw on port 1/2` failed

            08/30/15 18:06:42.004 ERROR : [Port 1/2] Flash failed (Command type: Device enumeration)

            08/30/15 18:06:42.044 TRACE : Sending system tray notification: "Flash failed"

            • 3. Re: Problem with Edison
              Intel_Peter

              That's weird, did you try it using a an external power supply?

              Nevertheless, you could try the flashall method, you will find how to do it in: How to Run the Flashall Script

               

              Peter.

              • 4. Re: Problem with Edison
                adramalech

                Thank seemed to do it.  Ran it on Ubuntu 14.04.3 and the ./flashall.sh worked.

                 

                Using U-Boot target: edison-blankcdc

                Now waiting for dfu device 8087:0a99

                Please plug and reboot the board

                Flashing IFWI

                ##################################################] finished!

                ##################################################] finished!

                Flashing U-Boot

                ##################################################] finished!

                Flashing U-Boot Environment

                ##################################################] finished!

                Flashing U-Boot Environment Backup

                ##################################################] finished!

                Rebooting to apply partition changes

                Now waiting for dfu device 8087:0a99

                Flashing boot partition (kernel)

                ##################################################] finished!

                Flashing rootfs, (it can take up to 5 minutes... Please be patient)

                ##################################################] finished!

                Rebooting

                U-boot & Kernel System Flash Success...

                Your board needs to reboot to complete the flashing procedure, please do not unplug it for 2 minutes.