The procedure to create a RAID0 array with SSD's is the same as with "normal" SATA hdd's.
So this applies to Bios settings as well?
1 of 1 people found this helpful
Yes, you got it right.
You definitely need to set the SATA to RAID in bios, then after the system restarts when the changes are applied, and if you are using Intel Matrix, you need to press Ctrl+i ge to the RAID bios and create the RAID 0 as you did before. It is exactly the same procedure, nothing has changed even if you are using SSDs.
Hope this is helpful to you.