I have difficulty in obtaining Intel drivers to create WinPE bootable media with Acronis Backup (Advanced) for my Intel NUC-Kit-D54250WYK computer under Windows 7 Professional 64-bit SP1.
The right procedure to add the drivers is:
- Click Add and specify the path to the necessary *.inf file for a corresponding SCSI, RAID, SATA controller, network adapter, tape drive or other device.
- Repeat this procedure for each driver you want to be included in the resulting WinPE boot media.
However, when I unzip the drivers I downloaded from Intel NUC-Kit-D54250WYK drivers website, the *.inf files are not accessible, and all I can access are .exe or .msi installation files that mask any *.inf files and prevent their use in WinPE.
[They also mask the paths to any *.sys files that the *.inf files indicate, so the WinPE bootable media cannot use them as drivers when booting].
So, please advise how to download useable drivers for my WinPE bootable media for Intel NUC-Kit-D54250WYK, Windows 7 Professional 64-bit SP1.
Also - where is the Network Adapter/Controller driver for Intel NUC-Kit-D54250WYK? It is not among the drivers on the website https://downloadcenter.intel.com/product/76977/Intel-NUC-Kit-D54250WYK
You asked: where is the Network Adapter/Controller driver for Intel NUC-Kit-D54250WYK
I am not from Intel, but instead of looking under Kits-NUC for graphics/wireless/ethernet networking, I often have better luck looking under Graphics or Wireless or Ethernet from that top level. For example I think the Ethernet component is i218-V which leads you to drivers such as 20.2