4 Replies Latest reply on Jul 17, 2015 9:37 AM by DiegoV_Intel

    using webam error

    Heshamnouby

      when I bought webcam and put it at usb port of galileo , yocto knew it as uvc diver but after seconds the system tell me :!

       

       

       

      init : sending processes the term signal !

       

      and when i reboot it without webcam , the same error :/

       

       

      what can i do ?

       

      and whats webcam is the best ?

       

      thank u

       

       

       

       


          GNU GRUB  version 0.97  (604K lower / 244604K upper memory)

      +-------------------------------------------------------------------------+
      | Clanton SVP kernel-SPI initrd-SPI IMR-On IO-APIC/HPET NoEMU             |
      | Clanton SVP kernel-MassStorage initrd-MassStorage image-full IMR-On I>  |
      |                                                                         |
      |                                                                         |
      |                                                                         |
      |                                                                         |
      |                                                                         |
      |                                                                         |
      |                                                                         |
      |                                                                         |
      |                                                                         |
      |                                                                         |
      +-------------------------------------------------------------------------+
            Use the ^ and v keys to select which entry is highlighted.
            Press enter to boot the selected OS, 'e' to edit the
            commands before booting, 'a' to modify the kernel arguments
            before booting, or 'c' for a command-line.

         The highlighted entry will be booted automatically in 1 seconds.
      Found layout.conf @ 0xffcff000 len 0x00000c14

      # WARNING: this file is indirectly included in a Makefile where it
      # defines Make targets and pre-requisites. As a consequence you MUST
      # run "make clean" BEFORE making changes to it. Failure to do so may
      # result in the make process being unable to clean files it no longer
      # has references to.

      [main]
      size=8388608
      type=global


      [MFH]
      version=0x1
      flags=0x0
      address=0xfff08000
      type=mfh


      [Flash Image Version]
      type=mfh.version
      meta=version
      value=0x01000400

      [ROM_OVERLAY]
      address=0xfffe0000
      item_file=../../Quark_EDKII/Build/QuarkPlatform/RELEASE_GCC/FV/FlashModules/EDKII_BOOTROM_OVERRIDE.Fv
      type=some_type

      [signed-key-module]
      address=0xfffd8000
      item_file=config/SvpSignedKeyModule.bin
      svn_index=0
      type=some_type
      in_capsule=no

      # On a deployed system, the SVN area holds the last known secure
      # version of each signed asset.
      # TODO: generate this area by collecting the SVN from the assets
      # themselves.
      [svn-area]
      address=0xfffd0000
      item_file=config/SVNArea.bin
      type=some_type
      # A capsule upgrade must implement some smart logic to make sure the
      # highest Security Version Number always wins (rollback protection)
      in_capsule=no

      [fixed_recovery_image]
      address=0xfff90000
      item_file=../../Quark_EDKII/Build/QuarkPlatform/RELEASE_GCC/FV/FlashModules/EDKII_RECOVERY_IMAGE1.Fv
      sign=yes
      type=mfh.host_fw_stage1_signed
      svn_index=2
      # in_capsule=no

      [NV_Storage]
      address=0xfff30000
      item_file=../../Quark_EDKII/Build/QuarkPlatform/RELEASE_GCC/FV/FlashModules/EDKII_NVRAM.bin
      type=some_type

      [RMU]
      address=0xfff00000
      item_file=../../Quark_EDKII/Build/QuarkPlatform/RELEASE_GCC/FV/FlashModules/RMU.bin
      type=none_registered

      [boot_stage1_image1]
      address=0xffec0000
      item_file=../../Quark_EDKII/Build/QuarkPlatform/RELEASE_GCC/FV/FlashModules/EDKII_BOOT_STAGE1_IMAGE1.Fv
      sign=yes
      boot_index=0
      type=mfh.host_fw_stage1_signed
      svn_index=1

      [boot_stage1_image2]
      address=0xffe80000
      item_file=../../Quark_EDKII/Build/QuarkPlatform/RELEASE_GCC/FV/FlashModules/EDKII_BOOT_STAGE1_IMAGE2.Fv
      sign=yes
      boot_index=1
      type=mfh.host_fw_stage1_signed
      svn_index=1

      [boot_stage_2_compact]
      address=0xffd00000
      item_file=../../Quark_EDKII/Build/QuarkPlatform/RELEASE_GCC/FV/FlashModules/EDKII_BOOT_STAGE2_COMPACT.Fv
      sign=yes
      type=mfh.host_fw_stage2_signed
      svn_index=3

      [Ramdisk]
      address=0xffa60000
      item_file=../../meta-clanton/yocto_build/tmp/deploy/image-spi-galileo/image-spi-galileo-clanton.cpio.lzma
      sign=yes
      type=mfh.ramdisk_signed
      svn_index=7

      [LAYOUT.CONF_DUMP]
      address=0xffcff000
      type=mfh.build_information
      meta=layout

      [Kernel]
      address=0xff852000
      item_file=../../meta-clanton/yocto_build/tmp/deploy/image-spi-galileo/bzImage
      sign=yes
      type=mfh.kernel_signed
      svn_index=6

      [grub.conf]
      address=0xff851000
      item_file=grub/grub-spi.conf
      sign=yes
      type=mfh.bootloader_conf_signed
      svn_index=5

      [grub]
      address=0xff800000
      item_file=../../meta-clanton/yocto_build/tmp/deploy/image-spi-galileo/grub.efi
      sign=yes
      fvwrap=yes
      guid=B43BD3E1-64D1-4744-9394-D0E1C4DE8C87
      type=mfh.bootloader_signed
      svn_index=4


      [Linux-EFI, setup=0x10c8, size=0x1e0c70]
      [Initrd, addr=0xd7ca000, size=0x1a12cf]
      [    0.000000] Initializing cgroup subsys cpuset
      [    0.000000] Initializing cgroup subsys cpu
      [    0.000000] Linux version 3.8.7-yocto-standard (avt@biglaptop-lnx.md.local) (gcc version 4.7.2 (GCC) ) #1 Sun Oct 19 17:59:30 CEST 2014
      [    0.000000] Disabling PGE capability bit
      [    0.000000] e820: BIOS-provided physical RAM map:
      [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000096fff] usable
      [    0.000000] BIOS-e820: [mem 0x0000000000097000-0x0000000000097fff] reserved
      [    0.000000] BIOS-e820: [mem 0x0000000000098000-0x000000000009ffff] usable
      [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000efdefff] usable
      [    0.000000] BIOS-e820: [mem 0x000000000efdf000-0x000000000f01efff] ACPI data
      [    0.000000] BIOS-e820: [mem 0x000000000f01f000-0x000000000f0defff] reserved
      [    0.000000] BIOS-e820: [mem 0x000000000f0df000-0x000000000fddefff] ACPI NVS
      [    0.000000] BIOS-e820: [mem 0x000000000fddf000-0x000000000fdeefff] reserved
      [    0.000000] BIOS-e820: [mem 0x000000000fdef000-0x000000000fdeffff] usable
      [    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e1ffffff] reserved
      [    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
      [    0.000000] Early serial console at MMIO32 0x9000b000 (options '115200n8')
      [    0.000000] bootconsole [uart0] enabled
      [    0.000000] NX (Execute Disable) protection: active
      [    0.000000] efi: EFI v2.31 by EKI
      [    0.000000] efi:  SMBIOS=0xfdee000  ACPI=0xf01e000  ACPI 2.0=0xf01e014
      [    0.000000] efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x0000000000095000) (0MB)
      [    0.000000] efi: mem01: type=2, attr=0xf, range=[0x0000000000095000-0x0000000000097000) (0MB)
      [    0.000000] efi: mem02: type=0, attr=0xf, range=[0x0000000000097000-0x0000000000098000) (0MB)
      [    0.000000] efi: mem03: type=7, attr=0xf, range=[0x0000000000098000-0x00000000000a0000) (0MB)
      [    0.000000] efi: mem04: type=2, attr=0xf, range=[0x0000000000100000-0x00000000002e1000) (1MB)
      [    0.000000] efi: mem05: type=7, attr=0xf, range=[0x00000000002e1000-0x0000000001ede000) (27MB)
      [    0.000000] efi: mem06: type=4, attr=0xf, range=[0x0000000001ede000-0x0000000002000000) (1MB)
      [    0.000000] efi: mem07: type=7, attr=0xf, range=[0x0000000002000000-0x000000000bfe0000) (159MB)
      [    0.000000] efi: mem08: type=4, attr=0xf, range=[0x000000000bfe0000-0x000000000c000000) (0MB)
      [    0.000000] efi: mem09: type=7, attr=0xf, range=[0x000000000c000000-0x000000000d7ca000) (23MB)
      [    0.000000] efi: mem10: type=2, attr=0xf, range=[0x000000000d7ca000-0x000000000d96c000) (1MB)
      [    0.000000] efi: mem11: type=4, attr=0xf, range=[0x000000000d96c000-0x000000000d96d000) (0MB)
      [    0.000000] efi: mem12: type=2, attr=0xf, range=[0x000000000d96d000-0x000000000dd6f000) (4MB)
      [    0.000000] efi: mem13: type=4, attr=0xf, range=[0x000000000dd6f000-0x000000000ddb4000) (0MB)
      [    0.000000] efi: mem14: type=2, attr=0xf, range=[0x000000000ddb4000-0x000000000ddb6000) (0MB)
      [    0.000000] efi: mem15: type=1, attr=0xf, range=[0x000000000ddb6000-0x000000000ddf8000) (0MB)
      [    0.000000] efi: mem16: type=4, attr=0xf, range=[0x000000000ddf8000-0x000000000e28b000) (4MB)
      [    0.000000] efi: mem17: type=3, attr=0xf, range=[0x000000000e28b000-0x000000000e28f000) (0MB)
      [    0.000000] efi: mem18: type=4, attr=0xf, range=[0x000000000e28f000-0x000000000e293000) (0MB)
      [    0.000000] efi: mem19: type=3, attr=0xf, range=[0x000000000e293000-0x000000000e296000) (0MB)
      [    0.000000] efi: mem20: type=4, attr=0xf, range=[0x000000000e296000-0x000000000e2f0000) (0MB)
      [    0.000000] efi: mem21: type=3, attr=0xf, range=[0x000000000e2f0000-0x000000000e2fd000) (0MB)
      [    0.000000] efi: mem22: type=4, attr=0xf, range=[0x000000000e2fd000-0x000000000e300000) (0MB)
      [    0.000000] efi: mem23: type=3, attr=0xf, range=[0x000000000e300000-0x000000000e302000) (0MB)
      [    0.000000] efi: mem24: type=4, attr=0xf, range=[0x000000000e302000-0x000000000e303000) (0MB)
      [    0.000000] efi: mem25: type=3, attr=0xf, range=[0x000000000e303000-0x000000000e308000) (0MB)
      [    0.000000] efi: mem26: type=4, attr=0xf, range=[0x000000000e308000-0x000000000e309000) (0MB)
      [    0.000000] efi: mem27: type=3, attr=0xf, range=[0x000000000e309000-0x000000000e30f000) (0MB)
      [    0.000000] efi: mem28: type=4, attr=0xf, range=[0x000000000e30f000-0x000000000e310000) (0MB)
      [    0.000000] efi: mem29: type=3, attr=0xf, range=[0x000000000e310000-0x000000000e31e000) (0MB)
      [    0.000000] efi: mem30: type=4, attr=0xf, range=[0x000000000e31e000-0x000000000e31f000) (0MB)
      [    0.000000] efi: mem31: type=3, attr=0xf, range=[0x000000000e31f000-0x000000000e321000) (0MB)
      [    0.000000] efi: mem32: type=4, attr=0xf, range=[0x000000000e321000-0x000000000e322000) (0MB)
      [    0.000000] efi: mem33: type=3, attr=0xf, range=[0x000000000e322000-0x000000000e354000) (0MB)
      [    0.000000] efi: mem34: type=4, attr=0xf, range=[0x000000000e354000-0x000000000e358000) (0MB)
      [    0.000000] efi: mem35: type=3, attr=0xf, range=[0x000000000e358000-0x000000000e35b000) (0MB)
      [    0.000000] efi: mem36: type=4, attr=0xf, range=[0x000000000e35b000-0x000000000e36e000) (0MB)
      [    0.000000] efi: mem37: type=3, attr=0xf, range=[0x000000000e36e000-0x000000000e377000) (0MB)
      [    0.000000] efi: mem38: type=4, attr=0xf, range=[0x000000000e377000-0x000000000e378000) (0MB)
      [    0.000000] efi: mem39: type=3, attr=0xf, range=[0x000000000e378000-0x000000000e381000) (0MB)
      [    0.000000] efi: mem40: type=4, attr=0xf, range=[0x000000000e381000-0x000000000e383000) (0MB)
      [    0.000000] efi: mem41: type=3, attr=0xf, range=[0x000000000e383000-0x000000000e39c000) (0MB)
      [    0.000000] efi: mem42: type=4, attr=0xf, range=[0x000000000e39c000-0x000000000e3b5000) (0MB)
      [    0.000000] efi: mem43: type=3, attr=0xf, range=[0x000000000e3b5000-0x000000000e3c2000) (0MB)
      [    0.000000] efi: mem44: type=4, attr=0xf, range=[0x000000000e3c2000-0x000000000e412000) (0MB)
      [    0.000000] efi: mem45: type=3, attr=0xf, range=[0x000000000e412000-0x000000000e415000) (0MB)
      [    0.000000] efi: mem46: type=4, attr=0xf, range=[0x000000000e415000-0x000000000e418000) (0MB)
      [    0.000000] efi: mem47: type=3, attr=0xf, range=[0x000000000e418000-0x000000000e431000) (0MB)
      [    0.000000] efi: mem48: type=4, attr=0xf, range=[0x000000000e431000-0x000000000e437000) (0MB)
      [    0.000000] efi: mem49: type=3, attr=0xf, range=[0x000000000e437000-0x000000000e43f000) (0MB)
      [    0.000000] efi: mem50: type=4, attr=0xf, range=[0x000000000e43f000-0x000000000e5a0000) (1MB)
      [    0.000000] efi: mem51: type=3, attr=0xf, range=[0x000000000e5a0000-0x000000000e5b5000) (0MB)
      [    0.000000] efi: mem52: type=4, attr=0xf, range=[0x000000000e5b5000-0x000000000e802000) (2MB)
      [    0.000000] efi: mem53: type=3, attr=0xf, range=[0x000000000e802000-0x000000000e807000) (0MB)
      [    0.000000] efi: mem54: type=4, attr=0xf, range=[0x000000000e807000-0x000000000e80a000) (0MB)
      [    0.000000] efi: mem55: type=3, attr=0xf, range=[0x000000000e80a000-0x000000000e80e000) (0MB)
      [    0.000000] efi: mem56: type=4, attr=0xf, range=[0x000000000e80e000-0x000000000e80f000) (0MB)
      [    0.000000] efi: mem57: type=3, attr=0xf, range=[0x000000000e80f000-0x000000000e829000) (0MB)
      [    0.000000] efi: mem58: type=4, attr=0xf, range=[0x000000000e829000-0x000000000e82a000) (0MB)
      [    0.000000] efi: mem59: type=3, attr=0xf, range=[0x000000000e82a000-0x000000000e82c000) (0MB)
      [    0.000000] efi: mem60: type=4, attr=0xf, range=[0x000000000e82c000-0x000000000e82e000) (0MB)
      [    0.000000] efi: mem61: type=3, attr=0xf, range=[0x000000000e82e000-0x000000000e834000) (0MB)
      [    0.000000] efi: mem62: type=4, attr=0xf, range=[0x000000000e834000-0x000000000e84e000) (0MB)
      [    0.000000] efi: mem63: type=3, attr=0xf, range=[0x000000000e84e000-0x000000000e858000) (0MB)
      [    0.000000] efi: mem64: type=4, attr=0xf, range=[0x000000000e858000-0x000000000e859000) (0MB)
      [    0.000000] efi: mem65: type=3, attr=0xf, range=[0x000000000e859000-0x000000000e866000) (0MB)
      [    0.000000] efi: mem66: type=4, attr=0xf, range=[0x000000000e866000-0x000000000e878000) (0MB)
      [    0.000000] efi: mem67: type=3, attr=0xf, range=[0x000000000e878000-0x000000000e87a000) (0MB)
      [    0.000000] efi: mem68: type=4, attr=0xf, range=[0x000000000e87a000-0x000000000e882000) (0MB)
      [    0.000000] efi: mem69: type=3, attr=0xf, range=[0x000000000e882000-0x000000000e888000) (0MB)
      [    0.000000] efi: mem70: type=4, attr=0xf, range=[0x000000000e888000-0x000000000e88f000) (0MB)
      [    0.000000] efi: mem71: type=3, attr=0xf, range=[0x000000000e88f000-0x000000000e894000) (0MB)
      [    0.000000] efi: mem72: type=4, attr=0xf, range=[0x000000000e894000-0x000000000efdf000) (7MB)
      [    0.000000] efi: mem73: type=9, attr=0xf, range=[0x000000000efdf000-0x000000000f01f000) (0MB)
      [    0.000000] efi: mem74: type=5, attr=0x800000000000000f, range=[0x000000000f01f000-0x000000000f07f000) (0MB)
      [    0.000000] efi: mem75: type=6, attr=0x800000000000000f, range=[0x000000000f07f000-0x000000000f0df000) (0MB)
      [    0.000000] efi: mem76: type=10, attr=0xf, range=[0x000000000f0df000-0x000000000fddf000) (13MB)
      [    0.000000] efi: mem77: type=0, attr=0xf, range=[0x000000000fddf000-0x000000000fdef000) (0MB)
      [    0.000000] efi: mem78: type=4, attr=0xf, range=[0x000000000fdef000-0x000000000fdf0000) (0MB)
      [    0.000000] efi: mem79: type=11, attr=0x8000000000000000, range=[0x00000000e0000000-0x00000000e2000000) (32MB)
      [    0.000000] efi: mem80: type=11, attr=0x8000000000000000, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
      [    0.000000] SMBIOS 2.7 present.
      [    0.000000] e820: last_pfn = 0xfdf0 max_arch_pfn = 0x1000000
      [    0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
      [    0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
      [    0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
      [    0.000000] Scan for SMP in [mem 0x000aaaa0-0x000aae9f]
      [    0.000000] init_memory_mapping: [mem 0x00000000-0x0fdeffff]
      [    0.000000] RAMDISK: [mem 0x0d7ca000-0x0d96bfff]
      [    0.000000] ACPI: RSDP 0f01e014 00024 (v02 INTEL )
      [    0.000000] ACPI: XSDT 0f01d0e8 0006C (v01 INTEL  TIANO    00000004      01000013)
      [    0.000000] ACPI: FACP 0f01b000 000F4 (v03 INTEL  TIANO    00000004 INTL 0100000D)
      [    0.000000] ACPI: DSDT 0f012000 02401 (v01 INTEL  QuarkNcS 00000003 INTL 20140424)
      [    0.000000] ACPI: FACS 0f1c7000 00040
      [    0.000000] ACPI: UEFI 0fbd5000 00042 (v01                 00000000      00000000)
      [    0.000000] ACPI: APIC 0f01c000 0005A (v01 INTEL  TIANO    00000001 MSFT 00000000)
      [    0.000000] ACPI: HPET 0f01a000 00038 (v01                 00000001      00000000)
      [    0.000000] ACPI: MCFG 0f019000 0003C (v01                 00000001      00000000)
      [    0.000000] ACPI: SSDT 0f018000 004D8 (v01 SsgPmm  Cpu0Cst 00000011 INTL 20140424)
      [    0.000000] ACPI: SSDT 0f017000 0043F (v01 SsgPmm  Cpu0Ist 00000012 INTL 20140424)
      [    0.000000] ACPI: SSDT 0f016000 0013B (v01 SsgPmm  Cpu0Tst 00000013 INTL 20140424)
      [    0.000000] ACPI: SSDT 0f015000 00056 (v01 SsgPmm    CpuPm 00000010 INTL 20140424)
      [    0.000000] mapped APIC to         ffffb000 (        fee00000)
      [    0.000000] 0MB HIGHMEM available.
      [    0.000000] 253MB LOWMEM available.
      [    0.000000]   mapped low ram: 0 - 0fdf0000
      [    0.000000]   low ram: 0 - 0fdf0000
      [    0.000000] Zone ranges:
      [    0.000000]   Normal   [mem 0x00010000-0x0fdeffff]
      [    0.000000]   HighMem  empty
      [    0.000000] Movable zone start for each node
      [    0.000000] Early memory node ranges
      [    0.000000]   node   0: [mem 0x00010000-0x00096fff]
      [    0.000000]   node   0: [mem 0x00098000-0x0009ffff]
      [    0.000000]   node   0: [mem 0x00100000-0x0efdefff]
      [    0.000000]   node   0: [mem 0x0fdef000-0x0fdeffff]
      [    0.000000] Using APIC driver default
      [    0.000000] ACPI: PM-Timer IO Port: 0x1008
      [    0.000000] mapped APIC to         ffffb000 (        fee00000)
      [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
      [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
      [    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
      [    0.000000] IOAPIC[0]: Assigned apic_id 1
      [    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
      [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
      [    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 1, APIC INT 02
      [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
      [    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 1, APIC INT 09
      [    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 1, APIC INT 01
      [    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 1, APIC INT 03
      [    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 1, APIC INT 04
      [    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID 1, APIC INT 05
      [    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 1, APIC INT 06
      [    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 1, APIC INT 07
      [    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 1, APIC INT 08
      [    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID 1, APIC INT 0a
      [    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID 1, APIC INT 0b
      [    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 1, APIC INT 0c
      [    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 1, APIC INT 0d
      [    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 1, APIC INT 0e
      [    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 1, APIC INT 0f
      [    0.000000] Using ACPI (MADT) for SMP configuration information
      [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
      [    0.000000] mapped IOAPIC to ffffa000 (fec00000)
      [    0.000000] e820: [mem 0x0fdf0000-0xdfffffff] available for PCI devices
      [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60787
      [    0.000000] Kernel command line: root=/dev/ram0 console=ttyS1,115200n8 earlycon=uart8250,mmio32,0x9000b000,115200n8 reboot=efi,warm apic=debug rw LABEL=boot debugshell=5 rootimage=image-full-galileo-clanton.ext3 efi_main=0x000000015ad76880 jmp_code32=0x00000001993082ce
      [    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
      [    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
      [    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
      [    0.000000] __ex_table already sorted, skipping sort
      [    0.000000] Initializing CPU#0
      [    0.000000] Initializing HighMem for node 0 (00000000:00000000)
      [    0.000000] Memory: 216192k/260032k available (2849k kernel code, 28988k reserved, 1455k data, 308k init, 0k highmem)
      [    0.000000] virtual kernel memory layout:
      [    0.000000]     fixmap  : 0xfffa2000 - 0xfffff000   ( 372 kB)
      [    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
      [    0.000000]     vmalloc : 0xd05f0000 - 0xffbfe000   ( 758 MB)
      [    0.000000]     lowmem  : 0xc0000000 - 0xcfdf0000   ( 253 MB)
      [    0.000000]       .init : 0xc1435000 - 0xc1482000   ( 308 kB)
      [    0.000000]       .data : 0xc12c8592 - 0xc14343c0   (1455 kB)
      [    0.000000]       .text : 0xc1000000 - 0xc12c8592   (2849 kB)
      [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
      [    0.000000] SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
      [    0.000000] NR_IRQS:2304 nr_irqs:256 16
      [    0.000000] Console: colour dummy device 80x25
      [    0.000000] tsc: Fast TSC calibration using PIT
      [    0.000000] tsc: Detected 399.076 MHz processor
      [    0.010012] Calibrating delay loop (skipped), value calculated using timer frequency.. 798.15 BogoMIPS (lpj=3990760)
      [    0.023035] pid_max: default: 32768 minimum: 301
      [    0.065479] Security Framework initialized
      [    0.070168] Mount-cache hash table entries: 512
      [    0.076856] Initializing cgroup subsys cpuacct
      [    0.080045] Initializing cgroup subsys freezer
      [    0.085114] Disabling PGE capability bit
      [    0.090040] Intel Pentium with F0 0F bug - workaround enabled.
      [    0.096675] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
      [    0.096675] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
      [    0.096675] tlb_flushall_shift: 6
      [    0.100040] CPU: Intel 05/09 (fam: 05, model: 09, stepping: 00)
      [    0.110152] ACPI: Core revision 20121018
      [    0.182462] Performance Events: no PMU driver, software events only.
      [    0.191227] Enabling APIC mode:  Flat.  Using 1 I/O APICs
      [    0.197219] Getting VERSION: 30010
      [    0.200047] Getting VERSION: 30010
      [    0.203821] Getting ID: 0
      [    0.206722] Getting ID: f000000
      [    0.210037] Getting LVT0: 700
      [    0.213331] Getting LVT1: 400
      [    0.216634] enabled ExtINT on CPU#0
      [    0.220140] ENABLING IO-APIC IRQs
      [    0.223823] Synchronizing Arb IDs.
      [    0.230643] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
      [    0.337353] Using local APIC timer interrupts.
      [    0.337353] calibrating APIC timer ...
      [    0.350000] ... lapic delta = 2494212
      [    0.350000] ... PM-Timer delta = 357953
      [    0.350000] ... PM-Timer result ok
      [    0.350000] ..... delta 2494212
      [    0.350000] ..... mult: 107125589
      [    0.350000] ..... calibration result: 3990739
      [    0.350000] ..... CPU clock speed is 399.0739 MHz.
      [    0.350000] ..... host bus clock speed is 399.0739 MHz.
      [    0.371414] devtmpfs: initialized
      [    0.377380] PM: Registering ACPI NVS region [mem 0x0f0df000-0x0fddefff] (13631488 bytes)
      [    0.390636] RTC time:  1:29:34, date: 07/14/15
      [    0.395956] NET: Registered protocol family 16
      [    0.410659] ACPI: bus type pci registered
      [    0.417840] PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xe0000000-0xe1ffffff] (base 0xe0000000)
      [    0.420056] PCI: MMCONFIG at [mem 0xe0000000-0xe1ffffff] reserved in E820
      [    0.430030] PCI: Using MMCONFIG for extended config space
      [    0.440032] PCI: Using configuration type 1 for base access
      [    0.514703] bio: create slab <bio-0> at 0
      [    0.521214] ACPI: Added _OSI(Module Device)
      [    0.525872] ACPI: Added _OSI(Processor Device)
      [    0.530232] ACPI: Added _OSI(3.0 _SCP Extensions)
      [    0.535471] ACPI: Added _OSI(Processor Aggregator Device)
      [    0.594281] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
      [    0.606285] ACPI: Interpreter enabled
      [    0.610063] ACPI: (supports S0 S3 S5)
      [    0.614463] ACPI: Using IOAPIC for interrupt routing
      [    0.729960] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
      [    0.744060] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-1f])
      [    0.762864] PCI host bridge to bus 0000:00
      [    0.767455] pci_bus 0000:00: root bus resource [bus 00-1f]
      [    0.770248] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
      [    0.780061] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
      [    0.786934] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
      [    0.790055] pci_bus 0000:00: root bus resource [mem 0x10000000-0xfebfffff]
      [    0.806648] pci 0000:00:17.0: PCI bridge to [bus 01]
      [    0.810371] pci 0000:00:17.1: PCI bridge to [bus 02]
      [    0.825620]  pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
      [    0.830046]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
      [    0.873935] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
      [    0.885154] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
      [    0.896244] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
      [    0.906250] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
      [    0.916246] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
      [    0.930678] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
      [    0.941972] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
      [    0.952946] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
      [    0.967514] SCSI subsystem initialized
      [    0.975410] Intel Quark Board GalileoGen2 Firmware Version 0x01000400
      [    0.982776] Intel Quark side-band driver registered
      [    0.991270] IMR alloc id 0 0x00010000 - 0x0001434c locked
      [    1.001553] PCI: Using ACPI for IRQ routing
      [    1.011550] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
      [    1.019384] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
      [    1.021039] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
      [    1.032560] Switching to clocksource hpet
      [    1.037950] pnp: PnP ACPI init
      [    1.037950] ACPI: bus type pnp registered
      [    1.043689] system 00:00: [mem 0xe0000000-0xe1ffffff] has been reserved
      [    1.051145] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
      [    1.058505] system 00:00: [mem 0x000c0000-0x000dffff] has been reserved
      [    1.065932] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
      [    1.073751] system 00:00: [mem 0xff800000-0xffffffff] has been reserved
      [    1.099163] system 00:03: [io  0x1000-0x100f] has been reserved
      [    1.105847] system 00:03: [io  0x1010-0x101f] has been reserved
      [    1.112511] system 00:03: [io  0x1100-0x113f] has been reserved
      [    1.119105] system 00:03: [io  0x1040-0x107f] has been reserved
      [    1.125765] system 00:03: [io  0x1140-0x117f] has been reserved
      [    1.144795] pnp 00:07: unknown resource type 19 in _CRS
      [    1.150695] pnp 00:07: can't evaluate _CRS: 1
      [    1.157678] pnp 00:08: unknown resource type 19 in _CRS
      [    1.163583] pnp 00:08: can't evaluate _CRS: 1
      [    1.170894] pnp 00:09: unknown resource type 19 in _CRS
      [    1.176710] pnp 00:09: can't evaluate _CRS: 1
      [    1.183919] pnp 00:0a: unknown resource type 19 in _CRS
      [    1.189737] pnp 00:0a: can't evaluate _CRS: 1
      [    1.196925] pnp 00:0b: unknown resource type 19 in _CRS
      [    1.202828] pnp 00:0b: can't evaluate _CRS: 1
      [    1.210771] pnp 00:0c: unknown resource type 19 in _CRS
      [    1.216586] pnp 00:0c: can't evaluate _CRS: 1
      [    1.223359] pnp: PnP ACPI: found 13 devices
      [    1.228007] ACPI: ACPI bus type pnp unregistered
      [    1.357276] pci 0000:00:17.0: BAR 8: assigned [mem 0x10000000-0x101fffff]
      [    1.364926] pci 0000:00:17.0: BAR 9: assigned [mem 0x10200000-0x103fffff 64bit pref]
      [    1.373623] pci 0000:00:17.1: BAR 8: assigned [mem 0x10400000-0x105fffff]
      [    1.381267] pci 0000:00:17.1: BAR 9: assigned [mem 0x10600000-0x107fffff 64bit pref]
      [    1.389893] pci 0000:00:17.0: BAR 7: assigned [io  0x2000-0x2fff]
      [    1.396766] pci 0000:00:17.1: BAR 7: assigned [io  0x3000-0x3fff]
      [    1.403630] pci 0000:00:17.0: PCI bridge to [bus 01]
      [    1.409166] pci 0000:00:17.0:   bridge window [io  0x2000-0x2fff]
      [    1.416017] pci 0000:00:17.0:   bridge window [mem 0x10000000-0x101fffff]
      [    1.423642] pci 0000:00:17.0:   bridge window [mem 0x10200000-0x103fffff 64bit pref]
      [    1.432322] pci 0000:00:17.1: PCI bridge to [bus 02]
      [    1.437856] pci 0000:00:17.1:   bridge window [io  0x3000-0x3fff]
      [    1.444705] pci 0000:00:17.1:   bridge window [mem 0x10400000-0x105fffff]
      [    1.452330] pci 0000:00:17.1:   bridge window [mem 0x10600000-0x107fffff 64bit pref]
      [    1.462049] NET: Registered protocol family 2
      [    1.468289] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
      [    1.476325] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
      [    1.483496] TCP: Hash tables configured (established 2048 bind 2048)
      [    1.490845] TCP: reno registered
      [    1.494456] UDP hash table entries: 256 (order: 0, 4096 bytes)
      [    1.501041] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
      [    1.508561] NET: Registered protocol family 1
      [    1.515152] Trying to unpack rootfs image as initramfs...
      [    2.124303] Freeing initrd memory: 1672k freed
      [    2.143364] microcode: Intel CPU family 0x5 not supported
      [    2.156821] HugeTLB registered 2 MB page size, pre-allocated 0 pages
      [    2.225258] msgmni has been set to 464
      [    2.234331] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
      [    2.242616] io scheduler noop registered
      [    2.246975] io scheduler deadline registered
      [    2.252887] io scheduler cfq registered (default)
      [    2.264862] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
      [    2.274411] ACPI: Sleep Button [SLPB]
      [    2.279648] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
      [    2.289196] ACPI: Power Button [PWRB]
      [    2.377760] Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled
      [    2.411022] 0000:00:14.1: ttyS0 at MMIO 0x9000f000 (irq = 17) is a 16550A
      [    2.441637] 0000:00:14.5: ttyS1 at MMIO 0x9000b000 (irq = 17) is a 16550A
      [    2.449390] console [ttyS1] enabled, bootconsole disabled
      [    2.449390] console [ttyS1] enabled, bootconsole disabled
      [    2.469620] brd: module loaded
      [    2.478808] loop: module loaded
      [    2.483127] lpc_sch_probe BIOS_CNTL 0x00000101
      [    2.487616] lpc_sch_probe new BIOS_CNTL 0x00000101
      [    2.492522] lpc_sch_probe RCBA @ 0xfed1c000
      [    2.506934] rtc_cmos 00:01: RTC can wake from S4
      [    2.513175] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
      [    2.519397] rtc0: alarms up to one day, 242 bytes nvram, hpet irqs
      [    2.526501] cpuidle: using governor ladder
      [    2.530892] cpuidle: using governor menu
      [    2.544717] eSRAM: CTRL 0x047f3f91 block 0x00000000
      [    2.549635] eSRAM: pages 128
      [    2.563062] intel_qrk_esram_test_probe/Oct 19 2014/17:58:02 complete OK !!
      [    2.572006] THRM: critical reset 104 c hot 95 c hardware failover 105 c
      [    2.581498] TCP: cubic registered
      [    2.584858] NET: Registered protocol family 17
      [    2.589956] ... APIC ID:      00000000 (0)
      [    2.590037] ... APIC VERSION: 00030010
      [    2.590037] 0000000000000000000000000000000000000000000000000000000000000000
      [    2.590037] 0000000000000000000000000000000000000000000000000000000000000000
      [    2.590037] 0000000000000000000000000000000000000000000000000000000000008000
      [    2.590037]
      [    2.621378] testing the IO APIC.......................
      [    2.627934] .................................... done.
      [    2.633172] Using IPI Shortcut mode
      [    2.643037]   Magic number: 7:87:458
      [    2.647032] rtc_cmos 00:01: setting system clock to 2015-07-14 01:29:36 UTC (1436837376)
      [    2.657123] Freeing unused kernel memory: 308k freed
      [    2.664447] Write protecting the kernel text: 2852k
      [    2.669701] Write protecting the kernel read-only data: 1232k
      [    2.675566] NX-protecting the kernel data: 3292k
      [    2.773033] udevd[531]: starting version 182
      [    3.130152] tsc: Refined TSC clocksource calibration: 399.076 MHz
      [    3.136305] Switching to clocksource tsc
      [    4.081423] sdhci: Secure Digital Host Controller Interface driver
      [    4.087648] sdhci: Copyright(c) Pierre Ossman
      [    4.133609] stmmaceth 0000:00:14.6: enabling device (0000 -> 0002)
      [    4.185207] ACPI: bus type usb registered
      [    4.196275] stmmac MSI mode enabled
      [    4.199623] Vendor 0x8086 Device 0x0937
      [    4.287807] usbcore: registered new interface driver usbfs
      [    4.351276] stmmac - user ID: 0x10, Synopsys ID: 0x37
      [    4.356369]  DMA HW capability register supported
      [    4.361004]  Enhanced/Alternate descriptors
      [    4.365415]  RX Checksum Offload Engine supported (type 2)
      [    4.370989]  TX Checksum insertion supported
      [    4.375297]  Enable RX Mitigation via HW Watchdog Timer
      [    4.418749] usbcore: registered new interface driver hub
      [    4.500734] usbcore: registered new device driver usb
      [    4.534032] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
      [    4.616276] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
      [    4.622932] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
      [    4.738721] ehci-pci: EHCI PCI platform driver
      [    4.917622] libphy: stmmac: probed
      [    4.921161] eth0: PHY ID 20005c90 at 1 IRQ 0 (stmmac-1:01) active
      [    4.981486] sdhci-pci 0000:00:14.0: SDHCI controller found [8086:08a7] (rev 10)
      [    5.110222] mmc0: SDHCI controller on PCI [0000:00:14.0] using ADMA
      [    5.116953] ohci_hcd 0000:00:14.4: OHCI Host Controller
      [    5.145049] ohci_hcd 0000:00:14.4: new USB bus registered, assigned bus number 1
      [    5.230484] ohci_hcd 0000:00:14.4: irq 16, io mem 0x9000c000
      [    5.266021] mmc0: new high speed SDHC card at address 0001
      [    5.342527] hub 1-0:1.0: USB hub found
      [    5.346382] hub 1-0:1.0: 2 ports detected
      [    5.381834] ehci-pci 0000:00:14.3: EHCI Host Controller
      [    5.387158] ehci-pci 0000:00:14.3: new USB bus registered, assigned bus number 2
      [    5.455049] ehci-pci 0000:00:14.3: INSNREG01 is 0x007f007f
      [    5.460672] ehci-pci 0000:00:14.3: INSNREG01 is 0x007f007f
      [    5.524544] ehci-pci 0000:00:14.3: irq 19, io mem 0x9000d000
      [    5.570305] ehci-pci 0000:00:14.3: USB 2.0 started, EHCI 1.00
      [    5.604924] hub 2-0:1.0: USB hub found
      [    5.608780] hub 2-0:1.0: 2 ports detected
      [    5.960197] usb 2-1: new high-speed USB device number 2 using ehci-pci
      [    6.040458] mmcblk0: mmc0:0001 SD16G 14.6 GiB
      [    6.080673]  mmcblk0: p1
      Waiting for removable media...
        5[    9.559248] kjournald starting.  Commit interval 5 seconds
      [    9.565191] EXT3-fs (loop0): warning: maximal mount count reached, running e2fsck is recommended
      [    9.579911] EXT3-fs (loop0): using internal journal
      [    9.595429] EXT3-fs (loop0): recovery complete
      [    9.600007] EXT3-fs (loop0): mounted filesystem with writeback data mode
      INIT: version 2.88 booting
      mount: mounting devtmpfs on /dev failed: Device or resource busy
      Starting udev
      [   10.898635] udevd[1029]: starting version 182
      [   11.777015] ce4100_spi 0000:00:15.0: enabling device (0000 -> 0002)
      [   11.946417] ce4100_spi 0000:00:15.1: enabling device (0000 -> 0002)
      [   12.074929] intel_qrk_gip 0000:00:15.2: enabling device (0000 -> 0002)
      [   12.186994] intel_qrk_gpio_restrict_probe: i2c adapter not ready yet. Deferring..
      [   12.390200] platform qrk-gpio-restrict-sc.0: Driver qrk-gpio-restrict-sc requests probe deferral
      [   12.650518] intel_qrk_gpio_probe UIO addr 0x90006000 internal_addr 0xd268a000 size 4096 memtype 1
      [   12.659496] intel_qrk_gip 0000:00:15.2: i2c speed set to 400kHz
      [   12.860931] Linux video capture interface: v2.00
      [   13.600293] uvcvideo: Found UVC 1.00 device USB2.0 UVC PC Camera (05e3:0510)
      [   13.879947] input: USB2.0 UVC PC Camera as /devices/pci0000:00/0000:00:14.3/usb2/2-1/2-1:1.0/input/input2
      [   14.123065] usbcore: registered new interface driver uvcvideo
      [   14.128853] USB Video Class driver (1.1.1)
      [   14.157095] sch_gpio_probe UIO port addr 0x1080 size 64 porttype 1
      [   16.924647] spi_master spi0: will run message pump with realtime priority
      [   16.943933] spi_master spi1: will run message pump with realtime priority
      [   17.425007] at24 0-0054: 1024 byte 24c08 EEPROM, writable, 1 bytes/write
      [   17.961880] adc1x8s102: module is from the staging directory, the quality is unknown, you have been warned.
      [   18.486167] EFI Variables Facility v0.08 2004-May-17
      Starting Bootlog daemon: bootlogd.
      umount: can't umount /media/realroot: Device or resource busy
      Configuring network interfaces... [   20.662341] eth0: device MAC address 98:4f:ee:05:35:0e
      udhcpc (v1.20.2) started
      Sending discover...
      Sending discover...
      Sending discover...
      No lease, failing
      kernel.hotplug = /sbin/mdev
      INIT: Entering runlevel: 5e TERM signa
      Starting system message bus: dbus.
      Starting Connection Manager
      Starting OpenBSD Secure Shell server: sshd
      [   32.287362] NET: Registered protocol family 10
      [   32.313448] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
      done.
      STARTDISTCC is set to false in /etc/default/distcc
      /usr/bin/distccd not starting
      Starting HOSTAP Daemon: Configuration file: /etc/hostapd.conf
      nl80211: 'nl80211' generic netlink not found
      Failed to initial[   32.769240] hostapd[1354]: segfault at 0 ip 080803bb sp bfa71db0 error ffff0004ize driver 'nl80 in hostapd[8048000+93000]211'
      rmdir[ctr
      l_interface]: No such file or directory
      /etc/rc5.d/S20hostapd: line 11:  1354 Segmentation fault      start-stop-daemon -S -x $DAEMON -- $ARGS
      Starting ntpd: done
      Starting syslogd/klogd: done
      * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon                       [ ok ]
      [   34.007580] g_serial: Vendor 0x8086 Product 0xbabe
      [   34.013136] g_serial gadget: Gadget Serial v2.4
      [   34.017744] g_serial gadget: g_serial ready
      [   34.129031] Initializing USB Mass Storage driver...
      [   34.146350] usbcore: registered new interface driver usb-storage
      [   34.152482] USB Mass Storage support registered.
      [   34.242516] i2c /dev entries driver
      [   34.460907] cfg80211: Calling CRDA to update world regulatory domain
      [   34.524928] Intel(R) Wireless WiFi driver for Linux, in-tree:
      [   34.530817] Copyright(c) 2003-2012 Intel Corporation
      [   34.640399] Bluetooth: Core ver 2.16
      [   34.655689] NET: Registered protocol family 31
      [   34.660285] Bluetooth: HCI device and connection manager initialized
      [   34.670166] Bluetooth: HCI socket layer initialized
      [   34.675123] Bluetooth: L2CAP socket layer initialized
      [   34.685770] Bluetooth: SCO socket layer initialized
      [   34.720816] usbcore: registered new interface driver btusb
      [   34.778612] usbcore: registered new interface driver usbhid
      [   34.784322] usbhid: USB HID core driver
      Starting galileod
      Stopping Bootlog daemon: bootlogd.

      Poky 9.0.2 (Yocto Project 1.4 Reference Distro) 1.4.2 clanton ttyS1

      INIT: Sending processes the term signal