4 Replies Latest reply on Jun 17, 2015 5:11 PM by Chavez91

    Need Help Updating firmware. Got stuck.

    Chavez91

      I Just bought the edison to start learning all this stuff. During the setup, when I downloaded the new firmware file. I wiped the edison like it says to in CMD but I forgot to copy the new files to the edison, and started the flash process. Now the Edison does not show up as a volume/drive in windows, so Im stuck trying to copy the files to the edison so I can continue. I can connect to it using PUTTY but I only get communication when it boots up. No login. Im using windows.  When I flash using the tool, it fails at 38%.

        • 1. Re: Need Help Updating firmware. Got stuck.
          Chavez91

          HERE IS THE PUTTY LOG

           

           

           

          ******************************

          PSH KERNEL VERSION: b0182b2b

                          WR: 20104000

          ******************************

           

           

          SCU IPC: 0x800000d0  0xfffce92c

           

           

          PSH miaHOB version: TNG.B0.VVBD.0000000c

           

           

          microkernel built 11:24:08 Feb  5 2015

           

           

          ******* PSH loader *******

          PCM page cache size = 192 KB

          Cache Constraint = 0 Pages

          Arming IPC driver ..

          Adding page store pool ..

          PagestoreAddr(IMR Start Address) = 0x04899000

          pageStoreSize(IMR Size)          = 0x00080000

           

           

          *** Ready to receive application ***

           

           

           

           

          U-Boot 2014.04 (Apr 29 2015 - 03:53:19)

           

           

                 Watchdog enabled

          DRAM:  980.6 MiB

          MMC:   tangier_sdhci: 0

          In:    serial

          Out:   serial

          Err:   serial

          Hit any key to stop autoboot:  0

          Target:ifwi

          Partitioning already done...

          Partitioning already done...

          Saving Environment to MMC...

          Writing to redundant MMC(0)... done

          GADGET DRIVER: usb_dnl_dfu

           

           

           

           

          ******************************

          PSH KERNEL VERSION: b0182b2b

                          WR: 20104000

          ******************************

           

           

          SCU IPC: 0x800000d0  0xfffce92c

           

           

          PSH miaHOB version: TNG.B0.VVBD.0000000c

           

           

          microkernel built 11:24:08 Feb  5 2015

           

           

          ******* PSH loader *******

          PCM page cache size = 192 KB

          Cache Constraint = 0 Pages

          Arming IPC driver ..

          Adding page store pool ..

          PagestoreAddr(IMR Start Address) = 0x04899000

          pageStoreSize(IMR Size)          = 0x00080000

           

           

          *** Ready to receive application ***

           

           

           

           

          ******************************

          PSH KERNEL VERSION: b0182b2b

                          WR: 20104000

          ******************************

           

           

          SCU IPC: 0x800000d0  0xfffce92c

           

           

          PSH miaHOB version: TNG.B0.VVBD.0000000c

           

           

          microkernel built 11:24:08 Feb  5 2015

           

           

          ******* PSH loader *******

          PCM page cache size = 192 KB

          Cache Constraint = 0 Pages

          Arming IPC driver ..

          Adding page store pool ..

          PagestoreAddr(IMR Start Address) = 0x04899000

          pageStoreSize(IMR Size)          = 0x00080000

           

           

          *** Ready to receive application ***

           

           

           

           

          U-Boot 2014.04 (Apr 29 2015 - 03:53:19)

           

           

                 Watchdog enabled

          DRAM:  980.6 MiB

          MMC:   tangier_sdhci: 0

          In:    serial

          Out:   serial

          Err:   serial

          Writing to redundant MMC(0)... done

          Writing to MMC(0)... done

          Hit any key to stop autoboot:  0

          Target:ifwi

          Partitioning using GPT

          Writing GPT: success!

          Saving Environment to MMC...

          Writing to redundant MMC(0)... done

          Partitioning already done...

          Saving Environment to MMC...

          Writing to MMC(0)... done

          GADGET DRIVER: usb_dnl_dfu

           

           

           

           

          Flash Tool Log

           

           

           

           

           

           

          06/15/15 19:36:56.168 INFO : [Port 7/4] Start flashing the flash configuration with dnx_fw start state for

          06/15/15 19:36:56.168 INFO : [Port 7/4] Starting flash ...

          06/15/15 19:36:56.168 INFO : [Port 7/4] Running `Notify 'C:\Users\Josh\Downloads\edison-image-ww18-15 (1)\helper\helper.html'` command

          06/15/15 19:36:56.640 INFO : Displaying 'file:///C:/Users/Josh/Downloads/edison-image-ww18-15 (1)/helper/helper.html' during 42000 ms

          06/15/15 19:36:56.663 INFO : [Port 7/4] Command `Notify 'C:\Users\Josh\Downloads\edison-image-ww18-15 (1)\helper\helper.html'` succeed

          06/15/15 19:36:56.663 INFO : [Port 7/4] Running `Wait for device with status dnx_fw on port 7/4` command

          06/15/15 19:37:06.963 INFO : [Port 7/4] Command `Wait for device with status dnx_fw on port 7/4` succeed

          06/15/15 19:37:06.963 INFO : [Port 7/4] Running `Notify 'Edison board plugged'` command

          06/15/15 19:37:07.125 INFO : Displaying 'Edison board plugged'' during 5000 ms

          06/15/15 19:37:07.129 INFO : [Port 7/4] Command `Notify 'Edison board plugged'` succeed

          06/15/15 19:37:07.129 INFO : [Port 7/4] Running `"xfstkFlashTool.exe" "C:\Users\Josh\Downloads\edison-image-ww18-15 (1)\edison_dnx_fwr.bin" "C:\Users\Josh\Downloads\edison-image-ww18-15 (1)\edison_ifwi-dbg-00.bin" "C:\Users\Josh\Downloads\edison-image-ww18-15 (1)\edison_dnx_osr.bin" "C:\Users\Josh\Downloads\edison-image-ww18-15 (1)\u-boot-edison.img" "0x80000007" "none" "none"` command

          06/15/15 19:37:07.222 INFO : [Port 7/4] Disabling xFSTK Misc DnX

          06/15/15 19:37:07.222 INFO : [Port 7/4] Disabling xFSTK wipe out ifwi option

          06/15/15 19:37:07.222 INFO : [Port 7/4] Using xFSTK Solo interface (new API)

          06/15/15 19:37:07.222 INFO : [Port 7/4] xFSTK Soft Fuse not set

          06/15/15 19:37:07.222 INFO : [Port 7/4] XFSTK Downloader API 1.8.0

          06/15/15 19:37:07.222 INFO : [Port 7/4] Copyright (c) 2015 Intel Corporation

          06/15/15 19:37:07.222 INFO : [Port 7/4] fwdnx -- C:\Users\Josh\Downloads\edison-image-ww18-15 (1)\edison_dnx_fwr.bin

          06/15/15 19:37:07.222 INFO : [Port 7/4] fwimage -- C:\Users\Josh\Downloads\edison-image-ww18-15 (1)\edison_ifwi-dbg-00.bin

          06/15/15 19:37:07.222 INFO : [Port 7/4] osdnx -- C:\Users\Josh\Downloads\edison-image-ww18-15 (1)\edison_dnx_osr.bin

          06/15/15 19:37:07.222 INFO : [Port 7/4] osimage -- C:\Users\Josh\Downloads\edison-image-ww18-15 (1)\u-boot-edison.img

          06/15/15 19:37:07.222 INFO : [Port 7/4] gpflags -- 0x80000007

          06/15/15 19:37:07.222 INFO : [Port 7/4] softfuse --

          06/15/15 19:37:07.222 INFO : [Port 7/4] XFSTK-STATUS--Detecting Intel Device - Attempt #0

          06/15/15 19:37:08.352 INFO : [Port 7/4] ....XFSTK-LOG--virtual bool MerrifieldDownloader::SetDevice(IGenericDevice*)

          06/15/15 19:37:08.352 INFO : [Port 7/4] Initiating download...

          06/15/15 19:37:08.354 INFO : [Port 7/4] XFSTK-STATUS--FW(Miscdnx) download is in progress ...

          06/15/15 19:37:08.355 INFO : [Port 7/4] XFSTK-STATUS--FW: Sending DnX DCFI00 ...

          06/15/15 19:37:11.207 INFO : [Port 7/4] XFSTK-STATUS--Error Code: 0 - Success

          06/15/15 19:37:11.207 INFO : [Port 7/4] XFSTK-STATUS--Firmware download completed. Continuing to OS...

          06/15/15 19:37:21.337 INFO : [Port 7/4] XFSTK-STATUS--Reconnecting to device - Attempt #1

          06/15/15 19:37:22.469 INFO : [Port 7/4] XFSTK-STATUS--POS download is in progress ...

          06/15/15 19:37:25.460 INFO : [Port 7/4] XFSTK-STATUS--Error Code: 0 - Success

          06/15/15 19:37:25.460 INFO : [Port 7/4] XFSTK-STATUS--Firmware and OS download completed.

          06/15/15 19:37:25.460 INFO : [Port 7/4] XFSTK: Transfer Completed Successfully.

          06/15/15 19:37:25.460 INFO : [Port 7/4] Success: Download of FW Completed.

          06/15/15 19:37:25.460 INFO : [Port 7/4] xfstkFlashTool exited with success

          06/15/15 19:37:25.461 INFO : [Port 7/4] Command `"xfstkFlashTool.exe" "C:\Users\Josh\Downloads\edison-image-ww18-15 (1)\edison_dnx_fwr.bin" "C:\Users\Josh\Downloads\edison-image-ww18-15 (1)\edison_ifwi-dbg-00.bin" "C:\Users\Josh\Downloads\edison-image-ww18-15 (1)\edison_dnx_osr.bin" "C:\Users\Josh\Downloads\edison-image-ww18-15 (1)\u-boot-edison.img" "0x80000007" "none" "none"` succeed

          06/15/15 19:37:25.461 INFO : [Port 7/4] Running `Wait for device with status pos on port 7/4` command

          06/15/15 19:37:41.071 INFO : [Port 7/4] Command `Wait for device with status pos on port 7/4` succeed

          06/15/15 19:37:41.071 INFO : [Port 7/4] Running `"C:\Program Files (x86)\Intel\Phone Flash Tool Lite\dfu-util.exe" "--alt" "u-boot0" "-D" "C:\Users\Josh\Downloads\edison-image-ww18-15 (1)\u-boot-edison.bin" "-t" "4096" "-d" "8087:0a99"` command

          06/15/15 19:37:41.199 WARNING: [Port 7/4] Command `"C:\Program Files (x86)\Intel\Phone Flash Tool Lite\dfu-util.exe" "--alt" "u-boot0" "-D" "C:\Users\Josh\Downloads\edison-image-ww18-15 (1)\u-boot-edison.bin" "-t" "4096" "-d" "8087:0a99"` failed

          06/15/15 19:37:41.199 INFO : [Port 7/4] Retrying `"C:\Program Files (x86)\Intel\Phone Flash Tool Lite\dfu-util.exe" "--alt" "u-boot0" "-D" "C:\Users\Josh\Downloads\edison-image-ww18-15 (1)\u-boot-edison.bin" "-t" "4096" "-d" "8087:0a99"` command

          06/15/15 19:37:41.326 ERROR : [Port 7/4] Command `"C:\Program Files (x86)\Intel\Phone Flash Tool Lite\dfu-util.exe" "--alt" "u-boot0" "-D" "C:\Users\Josh\Downloads\edison-image-ww18-15 (1)\u-boot-edison.bin" "-t" "4096" "-d" "8087:0a99"` failed

          06/15/15 19:37:41.326 ERROR : [Port 7/4] Flash failed (Command type: DFU)



          I hope that helps some....

          • 2. Re: Need Help Updating firmware. Got stuck.
            Intel_Alvarado

            Hi

             

            Were you following this guide and are stuck in step 4 right? Have you already tried using the Flash Tool Lite Flash Tool Lite User Manual | Intel® Developer Zone ? Give it a try and let us know your results.

             

            Sergio

            • 3. Re: Need Help Updating firmware. Got stuck.
              Chavez91

              Thankyou for the reply.

               

              So I just attempted the Flash Tool. Followed all the directions. I downloaded the  Release 2.1 Yocto* complete image as I believe that was the correct file I was supposed to download.

               

               

              It gets to 30% and hangs for a bit. Then jumps to 38% and fails.

               

              I attached the Log file.

               

              Let me know if there is any other information that you need.

              • 4. Re: Need Help Updating firmware. Got stuck.
                Chavez91

                Well 2 different Desktops and 2 laptops later, finally got the flash to take.

                 

                Thanks for the help.