I took the lock out of the thermal sensor at
So i can write to the sensor Register to change the Configuration
No Errors in build.
It is Built and on the board.
log at ./Build/QuarkPlatform/SECURE/RELEASE_GCC46/
followed the 1.1 BSP
created the links
booted board fine
capsule updated fine
but not sure if it worked as register is still locked
Report.log.zip 53.2 K
1 of 1 people found this helpful
Got it printing back in BIOS
So I know for sure that it is working as intended.
The file that i changed was UsbEnumer.c
and the line
DEBUG (( EFI_D_ERROR, "UsbEnumeratePort: 1.1 device Recovery GALILEO CHANGE BLAH Over Current\n", Port));
I put "GALILEO CHANGE BLAH" in the center
This line is printed with a USB is removed from the USB slot.
when the keyboard (It's what I used) is plugged out of the Galileo the Error pops up on the screen saying "UsbEnumeratePort: 1.1 device Recovery GALILEO CHANGE BLAH Over Current"