1 Reply Latest reply on May 18, 2015 8:05 AM by aleki_intel

    DC P3500

    BWC

      Hello

      how can I make a DC P3500 bootable on a S2600CO board?

      The board Firmware is new - SSD is not recognized as a boot drive. (EFI)

      In running system, the SSD runs fine under Win2012R2.

      Thank you S.G.

        • 1. Re: DC P3500
          aleki_intel

          Hello BWC,

           

          Here are some aspects and recommendations that may help:

           

          - The Intel® SSD DC P3700, P3600 and P3500 Series are bootable and support installation of an operating system on platforms that support UEFI* 2.3.1 BIOS. Please contact the manufacturer of your motherboard and confirm the UEFI version used in your system.

           

          - Make sure that the drive is connected to a PCIe Gen 3.0 x8 or x16 slot in your PC.

           

          - Contact the board manufacturer and get updated firmware (BIOS) for your motherboard.

           

          - Use the most recent driver version for your SSD. Version 1.1.0.1004 can be downloaded from Intel Download Center.