0 Replies Latest reply on Oct 2, 2009 1:36 AM by 12super

    DP43TF AHCI init device failed


      I have recently bought a DP43TF Motherboard. Also I have a Adaptec 3085 SATA/SAS Raidcontroller on the PCI-e x16 Slot.


      If I use AHCI as SATA Detection in the BIOS, I get an "Init device failed" on all drives connectet to the onboard SATA Controller.


      If I use IDE as SATA Detection in the BIOS, everything works fine.


      The newest BIOS (0098) is installed.


      Any suggestions?