3 Replies Latest reply on May 14, 2015 5:23 PM by CMata_Intel

    Yocto - Intel Galileo - OpenCV - C++

    Neko

      Hi all, I would like to inquire about the yocto image to be used for Intel Galileo, I have been reading several articles on the subject but can not stay clear some things.

       

      So far I've done the basic setup of guiding me here http://www.intel.com/content/www/us/en/embedded/products/galileo/galileo-06-yocto-video.html and achieve lift the initial yocto Intel on Galileo plate with the image of yocto download site, which weighs about 40 mb of this site http://www.intel.com/support/galileo/sb/CS-035101.htm. But I also found another related to image sdk iot weighs about 200 mb of this site https://software.intel.com/en-us/iot/hardware/galileo/downloads, which also achieves probe and lift it over the plate.

       

      I wonder what is the difference and what would be convenient to use me, because my intention is to perform an image processing with OpenCV in C ++. I'm using Ubuntu from the computer.

       

      I would also like to know that will be used depending on, I need to do or need to configure to start work on OpenCV on the plate with the code you've already developed and how it could see the results of the code. That is, as I can lift the OpenCV on the plate.

       

      As I mentioned, I found several articles about it but I can not specify information about a single right path, if I could please answer I've been stuck in this step.

       

      The ultimate goal of my project is to recognize objects and Intel OpenCV Galileo in C ++ language for a count of toy vehicles.