4 Replies Latest reply on May 21, 2015 1:03 PM by annu_shah

    intel galileo gen 2 RX TX communication with ssc-32u

    annu_shah

      Hi

      i wanted to do serial communication between the galileo board and the ssc-32u board.I connected the tx of galileo to the rx of ssc-32u and both the ground are connected.Following is the code:-

       

       

      void setup() //initializing serial communication baud rate

       

      {

         Serial1.begin(9600); //sets the baud rate at 9600 to match the one set on the SSC-32 board

      }

       

      void loop()

       

      {

       

        Serial1.println("#1 P500 T1000"); //turns the servo to the initial position in 1 second

       

        delay(1000); //delay for 1 second

        Serial1.println("#1 P2500 T1000"); //turns the servo to the final position in 1 second

       

        delay(1000); //delay for 1 second

       

      }

       

      no communication is being established.