Situation: When I am trying to upload to my Edison on an Arduino breakout board, this is the error I am getting.
Attempts: I have tried re-flashing, using another Arduino Breakout Board & using another USB cable from different USB ports. Selected right COM port, placed the switch towards micro-USB port instead of USB port.
Sketch uses 76,207 bytes (0%) of program storage space. Maximum is 10,000,000 bytes.
starting download script
Args to shell: C:\Intel\arduino-1.6.0+Intel\hardware\tools\x86\bin C:\Users\MOUHYE~1\AppData\Local\Temp\build5903910267688727999.tmp/Blink.cpp.elf COM67
# clupload script to invoke lsz
COM PORT 67
# Copyright (C) 2014 Intel Corporation
Converted COM Port COM67 to tty port /dev/ttyS66
Sending Command String to move to download if not already in download mode
# This library is free software; you can redistribute it and/or
# modify it under the terms of the GNU Lesser General Public
# License as published by the Free Software Foundation; either
# version 2.1 of the License, or (at your option) any later version.
# This library is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# Lesser General Public License for more details.
# You should have received a copy of the GNU Lesser General Public
# License along with this library; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
echo "starting download script"
Deleting existing sketch on target
echo "Args to shell:" $*
# ARG 1: Path to lsz executable.
# ARG 2: Elf File to download
# ARG 3: COM port to use.
#path contains \ need to change all to /
#COM ports are not always setup to be addressed via COM for redirect.
#/dev/ttySx are present. Howwever, COMy -> /dev/ttySx where x = y - 1
echo "COM PORT" $com_port_id
echo "Converted COM Port" $com_port_arg "to tty port" $tty_port_id
echo "Sending Command String to move to download if not already in download mode"
echo "~sketch downloadEdison" > $tty_port_id
C:\Intel\arduino-1.6.0+Intel/hardware/intel/i686/tools/izmir/clupload_win.sh: line 42: /dev/ttyS66: Read-only file system
#Move the existing sketch on target.
echo "Deleting existing sketch on target"
"$fixed_path/lsz.exe" --escape -c "mv -f /sketch/sketch.elf /sketch/sketch.elf.old" <> $tty_port_id 1>&0
C:\Intel\arduino-1.6.0+Intel/hardware/intel/i686/tools/izmir/clupload_win.sh: line 46: /dev/ttyS66: Read-only file system
# Execute the target download command
#Download the file.
"$fixed_path/lsz.exe" --escape --binary --overwrite $host_file_name <> $tty_port_id 1>&0
C:\Intel\arduino-1.6.0+Intel/hardware/intel/i686/tools/izmir/clupload_win.sh: line 51: /dev/ttyS66: Read-only file system
#mv the downloaded file to /sketch/sketch.elf
Moving downloaded file to /sketch/sketch.elf on target
echo "Moving downloaded file to /sketch/sketch.elf on target"
"$fixed_path/lsz.exe" --escape -c "mv $target_download_name /sketch/sketch.elf; chmod +x /sketch/sketch.elf" <> $tty_port_id 1>&0
C:\Intel\arduino-1.6.0+Intel/hardware/intel/i686/tools/izmir/clupload_win.sh: line 56: /dev/ttyS66: Read-only file system
What's with the "Read-only file system" ?
I have gone over multiple discussions in this forum but haven't come across anyone facing this problem.
I learned that I need to terminate bash.exe & lsz.exe from a discussion. Should I do this on my Edison's command line interface?