1 Reply Latest reply on Mar 4, 2015 2:20 PM by joe_intel

    Rapid Storage Technology - no rebuild after fail

    PerryW

      Last weekend a disk in my RAID failed.

       

      Here's what I saw on a Ctrl-I

      RSTScreen1.jpg

      Port 0 is the ssd boot drive

       

      The other three were all 1tb drives configured as RAID5

       

      A little research soon confirmed that that model/serial combo on port 2 is Seagate-ese for 'It's stuffed'

      I swapped the drive for another 1tb Barracuda and powered on.The Option Rom now showed the new drive as non raid on port 2 and the volume remained as failed

       

      As I was now able to fire up the OS I went in to the management app and saw:

       

      RSTScreen2.jpgRSTScreen3.jpg

      RSTScreen4.jpgRSTScreen5.jpg

       

      Rebuild has not kicked in and I can't see any option to start it

       

      Any ideas for me?