9 Replies Latest reply on Mar 23, 2015 1:32 AM by mhahn

    postBuild.sh failed?

    LimXian

      Hi, I am following Intel Edison Board Support Package, DOC # 331188-004.

      $ bitbake edison-image   was successful, however, when I do following postBuild.sh, there was an error message.

      vmlinux, no such file or directory. Do you know what's the problem?

       

      test@test:~/Edison/edison-src/build$ ../device-software/utils/flash/postBuild.sh

      1+0 records in

      1+0 records out

      4194304 bytes (4.2 MB) copied, 0.00389232 s, 1.1 GB/s

      1+0 records in

      1+0 records out

      4194304 bytes (4.2 MB) copied, 0.00404222 s, 1.0 GB/s

      1+0 records in

      1+0 records out

      4194304 bytes (4.2 MB) copied, 0.00503471 s, 833 MB/s

      1+0 records in

      1+0 records out

      4194304 bytes (4.2 MB) copied, 0.00704981 s, 595 MB/s

      1+0 records in

      1+0 records out

      4194304 bytes (4.2 MB) copied, 0.0054409 s, 771 MB/s

      1+0 records in

      1+0 records out

      4194304 bytes (4.2 MB) copied, 0.00750694 s, 559 MB/s

      1+0 records in

      1+0 records out

      4194304 bytes (4.2 MB) copied, 0.00690177 s, 608 MB/s

      cp: cannot stat ‘/home/hyon/Edison/edison-src/build/tmp/deploy/images/edison/vmlinux’: No such file or directory

      find: `/home/hyon/Edison/edison-src/u-boot': No such file or directory

      Image Name:   Edison Updater script

      Created:      Wed Mar  4 11:56:19 2015

      Image Type:   PowerPC Linux Script (uncompressed)

      Data Size:    14683 Bytes = 14.34 kB = 0.01 MB

      Load Address: 00010000

      Entry Point:  00010000

      Contents:

         Image 0: 14675 Bytes = 14.33 kB = 0.01 MB

      **** Done ***

      Files ready to flash in /home/hyon/Edison/edison-src/build/toFlash/

      Run the flashall script there to start flashing.

      *************