3 Replies Latest reply on Jan 20, 2015 1:18 PM by dparente

    avrdude: stk500_getsync(): not in sync: resp=0x30

    dparente

      Hello all

       

      a new problem found in my path toward my configuration of the intel edison to work as the central brain of an intelligent traffic light network, I was trying to upload my new sketch that would allo to communication the arduinao expansion board with the Edison Yocto Linux and start to change the timing of the different traffic lights but I am faced with a strange error that doesn't allow me to upload the sketch file to the arduino.

       

      avrdude: stk500_getsync(): not in sync: resp=0x30

       

      I have been chasing answeres through the internet for the last day, and all the solutions that I have found doesn't apply to my case.

       

      1) I have remove all cable connected to the board, so I don't have any TX or RX signals

      2) I have check to be using the right Arduino board in the  environment configuration

      3) I have reinstalled all the drivers and the arduino board.

      4) I have reflashed the entire Edison board

       

      But the error is still there. has anyone been able to solve this error with the Intel Edison?

       

      Regards,

       

      Daniel