1 Reply Latest reply on Jan 20, 2015 4:12 PM by David_Intel

    RS2BL080 RAID 10

    DJMohr

      Hi all

       

      Have been searching for answer before I posted, have kind of found an answer but need some clarification as well.

       

      So I run a S5520HC board with RS2BL080 controller, I have the 4 and 6 drive hot swap bays.

      My current configuration is 2x 600GB SAS (RAID 1) for my OS and 8x 300GB SAS (RAID 10) for whatever else.

       

      I want to replace my 300GB SAS drives with higher capacity drives but will only do this if I can once again have a RAID 10 VD. How would I go about configuring this?

       

      I would ideally like to install 8x 600GB SAS and if budget allows go for a 6x 800GB SSD.