2 Replies Latest reply on Dec 26, 2014 12:20 PM by Intel_Alvarado

Galileo ftdio_sio.ko module or SD linux image with ftdi_sio module integrated

fidopink Dec 13, 2014 8:21 AM

Hello everybody, I'm using a Galileo board first generation and I'd like to link it to my CC2530 device through USB cable.

When I look into my modules, this is what I can see:

root@clanton:/lib/modules/3.8.7-yocto-standard/kernel/drivers/usb/serial# ls -l

-rw-r--r-- 1 root root 15052 May 14 2014 pl2303.ko

-rw-r--r-- 1 root root 30004 May 14 2014 usbserial.ko

but I can't see ftdio_sio.ko....what can I find this module?

It's possible to download a linux SD image for Galileo with this module built in?

Thank you very much!

Bye

1. Re: Galileo ftdio_sio.ko module or SD linux image with ftdi_sio module integrated

Intel_Peter Dec 15, 2014 8:10 AM (in response to fidopink)

Hello fidopink,

I checked myself and in deed there is no ftdio_sio.ko file in /lib/modules/3.8.7-yocto-standard/kernel/drivers/usb/serial, and I don't know of any image that includes this file, but what's your issue? Do you not see ttyUSB0? If so, I suggest you to add the new device using udev, you can learn how to use udev here: https://wiki.archlinux.org/index.php/udev#Execute_on_USB_insert

However if you're looking for ftdi-sio, AlexT in his repo includes it, you can check it in here: Index of /galileo

Regards,
Peter.
Like Show 2 Likes(2)

Actions
2. Re: Galileo ftdio_sio.ko module or SD linux image with ftdi_sio module integrated

Intel_Alvarado Dec 26, 2014 12:20 PM (in response to Intel_Peter)

Hi fidopink,

Were you able to find and install the ftdio-sio module?

Regards
Sergio
Like Show 1 Likes(1)

Actions