- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I got my Flyswatter2 working with openocd to debug on my Galileo, but then I wanted to try the same thing on the Industrial Reference design board.
I get the following error message when starting openocd. Any tips on how to make this work?
Open On-Chip Debugger 0.8.0 (2014-12-08-11:22)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.sourceforge.net/doc/doxygen/bugs.html http://openocd.sourceforge.net/doc/doxygen/bugs.html
Info : only one transport option; autoselect 'jtag'
adapter speed: 4000 kHz
trst_only separate trst_push_pull
Info : clock speed 4000 kHz
Info : JTAG tap: quark_x10xx.cltap tap/device found: 0x0e681013 (mfg: 0x009, part: 0xe681, ver: 0x0)
enabling core tap
Info : JTAG tap: quark_x10xx.cpu enabled
Error: tapstatus invalid - scan_chain serialization or locked JTAG access issues
Link Copied
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thanks for joining the Intel communities.
Please address this matter here:
Allan.
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page