3 Replies Latest reply on Dec 22, 2014 4:53 PM by albertuslm

    Cannot upload any code to edison module

    albertuslm

      Hi all!

      After updating my edison module to the last available image, I cannot upload anymore any code to the board. I always get this error:

       

      starting download script

      #!/bin/sh

      #

      echo "starting download script"

      echo "Args to shell:" $*

      #

      # ARG 1: Path to lsz executable.

      # ARG 2: Elf File to download

      # ARG 3: TTY port to use.

      #

      #path may contain \ need to change all to /

      path_to_exe=$1

      fixed_path=${path_to_exe//\\/\/}

      #

      tty_port_id=$3

      echo "Serial Port PORT" $com_port_id "(note: should be /dev/cu.xxxxxx for OSX)"

      echo "Using tty Port" $tty_port_id

      #

      echo "Sending Command String to move to download if not already in download mode"

      echo "~sketch download" > $tty_port_id

      Args to shell: /Users/alopezmartin/Downloads/Arduino.app/Contents/Resources/Java/hardware/tools/x86/bin /var/folders/rq/rvmyl8g54_n681pn69ym7whh3901cr/T/build9011117794543231328.tmp/Blink.cpp.elf /dev/tty.usbmodem1413

      Serial Port PORT (note: should be /dev/cu.xxxxxx for OSX)

      Using tty Port /dev/tty.usbmodem1413

      Sending Command String to move to download if not already in download mode

       

      Using as serial port tty.usbmodem1413.

       

      Any ideas?

       

      Thanks!