6 Replies Latest reply on Jul 29, 2015 3:21 PM by RzR

    My D54250WYKH does not start after BIOS update

    Moorstream

      Hi,

       

      I have a problem with my NUC. I am running Windows 8.1 64-bit.

       

      I downloaded the latest executable driver for my NUC (WYLPT10H.86A.0030.EB.EXE) from this link: https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=24326&lang=eng&ProdId=3744

       

      When I started the BIOS update the NUC restarted. It never started again and all I saw is some blue flashing rectangles.

       

      I have tried to follow this instruction from http://www.intel.com/support/motherboards/desktop/sb/CS-034634.htm to recover but step 1 fails. My NUC does not shoe a menu after Three seconds. It just turns off again.

       

      Intel® NUC modelsInstructions
      DE3815TYKHE
      DE3815TYBE
      DN2820FYK
      D54250WYB
      D54250WYK
      D34010WYB
      D34010WYK
      1. When the Intel® NUC is off, press and hold the power button for approximately 3 seconds and then release it. The Power Button menu should appear. 
      2. Press F2 to enter Intel Visual Bios. 
      3. Press F9 to restore BIOS factory default values. 
      4. Press F10 to save and exit Visual BIOS.

       

       

      Please advice!

      Best regards, Moorstream