7 Replies Latest reply on Oct 10, 2014 5:38 PM by d.reuter

    How to flash a bricked Edison Mini-BreakOut Board?

    d.reuter


      Hi,

      today I received my brand new Edison Mini-BreakOut Board, but I'm not able to boot this device.

      It seems to be that it's not able to find it's boot partition on eMMC.

       

      I'm able to connect to the board via Putty and can see some boot messages from u-boot. This sequence is shown on my Putty session, repeating after a few seconds all the time:

      U-Boot 2014.04 (Aug 20 2014 - 16:08:32)

             Watchdog enabled
      DRAM:  980.6 MiB
        

      ******************************
      PSH KERNEL VERSION: b0182727
        WR: 20104000
      ******************************

      SCU IPC: 0x800000d0  0xfffce92c

      PSH miaHOB version: TNG .B0 .VVBD .0000000c

      microkernel  built 23:15:13  Apr 24 2014

      ******* PSH loader *******
      PCM page cache size = 192 KB
      Cache Constraint = 0 Pages
      Arming IPC driver ..
      Adding page store pool ..
      PagestoreAddr(IMR Start Address) = 0x04899000
      pageStoreSize(IMR Size)          = 0x00080000

      *** Ready to receive application ***

       

      With LS-USB I got the following USB device IDs from the Edison board:

      0x8086 0xE005 MERRIFIELD
      0x0403 0x6001 FT232R USB UART

       

      Any chance to fix this by reflashing the Edison?

      Thanks in advance.

       

      Dieter