Hello shabber, do you get three beeps from the system when you turn it on without RAM?
If yes, put the memory back and try checking the source of the video (input type) in the monitor settings.
No, I haven't tried with out ram
Do you want me to try??
Basically, this is the situation
Motherboard led glows and processor
fan rotates and other cpu fans too
Keyboard leds glows at the instant
when pc power button pressed
After that no keyboard led glows
System is running normally no beeps
Only problem is no display via hdmi
NOTE THIS IS FIRST RUN AFTER
NO OS HAS BEEN INSTALLED
i started it without ram ,it is running normal as it used to run with ram
NO BEEPS AT ALL.
After that i placed ram and checked for the display
NO DISPLAY VIA HDMI
what should i do now?
Is your RAM 1,35v ?
If you did not get any beeps without RAM is moment to use only the most basic components; so, test the system in minimum configuration: processor, motherboard and power supply; if possible in a non-conductive surface out of the case. Please make sure both power supply cables (12v and main power) are connected.
Is your problem resolved ?
I would like to gather some information about the scenario you are encountering with, to better understand the issue you could have.
May I have your system configuration?
-RAM maker and model(white sticker in the RAM):
Additionally, you could try the following to troubleshoot the issue.
-Test the system with different HDMI port (in the monitor/TV that you are currently using).
-Test the system with a different HDMI cable.
-Test each RAM module in each DIMM slot in the Motherboard.
If any additional information could be of importance for the scenario, please do advise me about it.
I look forward to your outcome on this.