0 Replies Latest reply on Jul 29, 2014 10:16 PM by Lisa098

    Easy way to configure PoE in Cisco 2960

    Lisa098

      How do i configure PoE in Cisco 2960? Have a question? Get the answer from the steps on Cisco 2960 PoE :

       

       

      1. Select the "Start" button on the Windows XP computer.

      2. Type "telnet aaa.bb.c.d" at the command prompt, replacing the "aaa.bb.c.d" with the IP address of the Cisco 2960, and then tap the "Enter" key.

      3. Enter the telnet access password for the Cisco 2960 when requested, and then tap the "Enter" key.

      4. Type "enable" at the command prompt, and then tap the "Enter" key.

      5. Enter the Privileged Exec password when requested at the command prompt, and tap the "Enter" key.

      6. Type "interface fastethernet1/2," replacing the "fastethernet1/2" with the name of an interface in which you wish to enable PoE, and then tap the "Enter" key.

      7. Type "end" at the command prompt and tap the "Enter" key.

       

       

      After the 7 steps, you can easy configure PoE in Cisco 2960 switch.You can aslo follow Cisco 2960 to help you know more about this series switch in detail.