I have problems with 2 devices connected on the nuc when resuming from standby.
So the original problem not still there.
It would be great if you can investigate that and find a solution.
Netflux has every 3 seconds a short freeze in picture when only connected by hdmi on my marantz receiver.
Thanks for the information. I will check on this but In the meantime can you provide your dxdiag report and the graphics report?
How to get it?
Dxdiag Report: Type dxdiag in Start Menu> open> Save> Copy/Paste here.
Graphics Report: Right click on desktop> Graphics Properties> Options> Drop Down Menu> Information Center> Save> Open .txt file created> Copy/Paste here.
Also, can you provide the TV model and AVR model?
tv: philips 37/pfl8684h
avr: marantz 1504
the attached files are from te desired configuration, nuc to avr to tv (all done by hdmi)
latest firmware and drivers are installed for nuc, tv and avr
Thanks for the information.
Have you tested this NUC with other device? Is it happening the same with other AVRs?
Can you also provide this information?
- Nuc AA# or SA#:
- Graphics driver version tested:
- Graphics port used (HDMI, DisplayPort):
- Graphics converter/adapter used (Yes/No):
- AV receiver used? Make/model:
Also, have you tested other systems with the same components?