1 Reply Latest reply on Jun 11, 2014 9:05 AM by allan_intel

    STOP Error in Windows 7 installation on Intel NUC DN2820FYKH




      I will install a Windows 7 64bit on my NUC DN2820FYK.

      The first problems I have solved, i use a keyboard with function.


      Now i have the next problem: I start the installation of Windows 7 from a USB-Stick (bootsequence is correct now)

      and after the first sequence (i think 20-25 seconds) the system promt with a bluescreen.


      On the Intel side i found a solution for this problem: update the BIOS of the NUC.


      I made the update from BIOS version 0015 to 0034, but the problem is the same.


      The message is:


      The BIOS in this system is not fully ACPI compliant, Please contact your system vendor for an updated BIOS.


      Technical information:


      *** STOP:  0x000000A5 (0x0000000000000011, 0x0000000000000008, 0xFFFFFFFFFFD15018, 0x0000000020120913)


      In the System I use a 8 GB 1,35V DIMM from Kingston, what can i do?

      Downgrade to BIOS version 0021?