Thanks for coming back to the community.
I understand you are getting some errors related to Intel® Rapid Storage.
I would say if you are not getting any performance issues or is actually affecting your computer at all, this is just SMART errors reported by event viewer.
Please try installing the latest Intel® Rapid Storage version 12.9, this is available here:
Thanks for the reply,
I updated to RST v.12.9 however the new version did not completely solve the problem.
Currently, Event Viewer consistently shows a cluster of 3 irstrtsv errors every 5 minutes.
I checked irstrtsv in Computer Management - Services and this Service is running and starts automatically.
Service description: "Flushes dirty pages on entry to Standby"
I tried a Diskeeper boot time chkdsk and defrag folders and that did not end well as the check disk corrupted the Win7 start up and resulted in a BSOD and I had to run chkdsk from Win7 install DVD - System Recovery Tools to get the Accelerated RAID-1 drives back.
As I get more time I will keep troubleshooting the LBA issue.
first, I'm writing from Germany and I hope, my english is good enough to comunicate with you ;-)
This Thread is a few month old and m6bigdog didn't do a response again. So I have the same problem with a Asus H87M Pro MoBo, Win7 Prof. 64 on an Samsung 840Pro SSD and no RAID. My event-log is gettin longer and longer with this above error-message and I could not find a way to fix it by myselfe. So I also opend a ticket today via telephone to the german support center. The man on the hotline was very helpfull, bud he had never heard bevore from this problem. So I hope, that someone from the Intel-Support could help me with this problem?
Thanks a lot and many greetings from good old germany ;-)
I download the latest version 13.2 knowing that this version is not yet available on the dell website for the E7440 model, but the problem persists I still have the same error on the event viewer of windows.
I have Dell ultrabook Latitude E7440 I7 with an M550 256GB SSD Micron
the error message :irstrtsv
Error: Unable to read LBA sector via passthru. : This application is not supported.sorry for my english
Thanks for the information.
Does this error message cause any performance issue?
Typically the errors reported on event viewer are just SMART errors but do not cause any problem performance issues.
I have not seen a loss of performance, but I would like to know why the error message is repetre every 3 minutes, and if it's possible to solve it.
Thank you for your help Allan.
Any updates on this issue?
This is the closest thing I could find for the error I am getting:
Error: Unable to read LBA sector directly. : The parameter is incorrect.
I have installed the latest drivers and am still seeing this.
I also have the same issue. I'm running a SSDMCEAC240B3 SSD inside a Intel NUC D54250WYK.
I'm running the latest RST v.12.9.
Or should I try the newer version 13.2 listed above (The Intel Driver Update Utility does not show this newer version).
Intel released a newer driver for Intel® Rapid Storage Technology. For the Intel® NUC Kit D54250WYK, the latest drivers and BIOS are available in the link below:
Remember to install the latest BIOS, chipset and ME drivers first.