3 Replies Latest reply on Aug 20, 2015 10:51 AM by DannyW

    No LAN after sleep on D54250WYKH Intel NUC

    Doogy

      I have a brand new D54250WYKH NUC running Windows 7 Pro x64 connected to a wired gigabit LAN and a Samsung LED TV.  It connects to the LAN immediately upon boot and has no issues until I put it to sleep.  When I wake it up, the LAN will not connect.  Disabling and re-enabling the adapter will cause it to connect within 3-5 seconds.  This is set up as a HTPC and in order for TV recording to work properly, it must resume from sleep by itself.

       

      I am running the latest  version 25 bios, and have all the latest drivers and windows updates installed as of 3/18/14.    I have one 8 GB stick of Crucial RAM, a Crucial 120GB mSata disk, and a WD 2.5" SATA drive installed.  There is not a wireless card installed.  HELP!!

       

      My peripheral part numbers are:

       

       

      8GB Crucial PC3-12800 1600MHz DDR3 204-Pin SODIMM NON ECC Unbuff CL11 1.35V

      120GB Crucial M500 mSATA 6Gb/s SSD

      1TB WD AV-25 SATA 2.5" 3Gb/s Drive w/16MB Cache