7 Replies Latest reply on Feb 14, 2014 8:45 PM by hamood_d10 Branched from an earlier discussion.

    Re: DZ77RE-75K show only 4GB memory


      I do not believe 3x4GB is a supported configuration for the DZ77RE-75K.


      Your board supports (1 DIMM) in slot 1 or slot 3.

      Your board supports (2 DIMMS, or 4 DIMMS) in Slots 1+2, or 1+2+3+4.


      So I recommend adding a 4th 4GB DIMM, or remove one of the existing 3 DIMMs and move the remaining 2x4GB into slots 1+2.


      See the diagram below for slot locations/numbers.