2 Replies Latest reply on May 20, 2014 10:35 AM by geer

    NUC D34010WYK Wakeup from BIOS dosent work

    geer

      env:

      BIOS Ver. WYLPT10H.86A.0023.2013.1224.0941

      Linux Ubuntu 13.10 (Kernel 3.11.0-15-generic)

       

      desc:

      I would like to wake up the power (Wake System from S5) on my NUC Haswell with the following command:

      ....

      # Checking the time setting

      root@myth-nuc:~# cat /proc/driver/rtc

      rtc_time        : 21:44:33

      rtc_date        : 2014-02-05

      alrm_time       : 00:00:00

      alrm_date       : 2014-02-06

      alarm_IRQ       : yes

      alrm_pending    : no

      update IRQ enabled      : no

      periodic IRQ enabled    : no

      periodic IRQ frequency  : 1024

      max user IRQ frequency  : 64

      24hr            : yes

      periodic_IRQ    : no

      update_IRQ      : no

      HPET_emulated   : yes

      BCD             : yes

      DST_enable      : no

      periodic_freq   : 1024

      batt_status     : okay


      # Setting the wake alarm to zero

      root@myth-nuc:~# echo 0 > /sys/class/rtc/rtc0/wakealarm


      # Setting the wake alarm +5 minutes in the future

      root@myth-nuc:~# echo `date '+%s' -d '+ 5 minutes'` > /sys/class/rtc/rtc0/wakealarm


      # Control everything looks fine
      root@myth-nuc:~# cat /proc/driver/rtc

      rtc_time        : 21:45:00

      rtc_date        : 2014-02-05

      alrm_time       : 21:49:53

      alrm_date       : 2014-02-05

      alarm_IRQ       : yes

      alrm_pending    : no

      update IRQ enabled      : no

      periodic IRQ enabled    : no

      periodic IRQ frequency  : 1024

      max user IRQ frequency  : 64

      24hr            : yes

      periodic_IRQ    : no

      update_IRQ      : no

      HPET_emulated   : yes

      BCD             : yes

      DST_enable      : no

      periodic_freq   : 1024

      batt_status     : okay


      # Shutdown the system

      root@myth-nuc:~# shutdown -P now

      ....

       

      This results is a NUC-Machine which is not waking up after the expected 5 minutes it stays in the sleep status forever.

      Trying with WakeUpOnLan (WOL) this is working without any problem.

      For the used configuration in the BIOS please have an look at he 111.jpg attachment.

        • 1. Re: NUC D34010WYK Wakeup from BIOS dosent work
          joe_intel

          I am sorry for your issue.

          It may also help to post your question in the Linux* Communities since the supported operating systems are Windows* 7, 8, and 8.1.

          • 2. Re: Re: NUC D34010WYK Wakeup from BIOS dosent work
            geer

            Thank you for the answer yes you are right there is now Windows installed and Linux is not supported.

            In the meantime I did try whit several versions and different Linux'es distributors, but there is always the same issue.

             

            In the BIOS settings there are the following Problems

            • No Wake Up on LAN.
            • Headless Configuration problems.
            • s4/s5 Deep sleep problem.

             

            This issues make the Box hard to use as an PVR Media Server, the NUC concept is great good CPU,Memory and SSD configurable low power consumption great stuff, but as soon as you are reaching the BIOS settings then you get lost.