Thanks for your help!
I have checked this file and download all related source packages from Intel website.
But I cannot find the clanton park edk2 package.
Do you have comment about this problem?
1. I had checked Board_Support_Package_Sources_for_Intel_Quark_v0.7.5_full_yocto_archive package, but could not find the package.
2. I had tried apt-get command to get clanton park edk2, but also failed.
You will need to download this BSP.
Extract it and you will find all of the software needed to build the UEFI.
clanton_peak_EDK2_v0.7.5 is EDKII-volumes_v0.7.5.tar.gz
Thanks for your help!
>clanton_peak_EDK2_v0.7.5 is EDKII-volumes_v0.7.5.tar.gz
Actully, we know this package.
But this is our target.
We want to know how can we create galileo UEFI BIOS by compiling source code.
Unlukily, we do not where the source can be found.
Compile UDK2010.SR1 ( Stuart siad that Galileo BIOS is based on this package, but I cannot find it on Intel's website) to create right FV files.
Has Intel BIOS released Galileo BIOS source code (Not FV files)?
Sorry for inconvenience!
To be honest, I don't know. Even though I work at Intel as you may notice from my username, I'm not involved into Galileo project by any means and have no visibility into it. This is just my free time hobby and all the statements I make here are my personal opinion, not Intel's, nor I can speak on behalf of Intel on these matters.
Let's try to ask forum admins, maybe they will be able to address this with Galileo team.
@JohnS @Intel_JEspinoza @maryc_intel - folks, maybe you could help fengyun to understand when the UEFI sources are going to be available?
The UEFI BIOS source is available public.
The new "Intel Quark BSP" (0.9.0) can be downloaded here:
Inside the file Board_Support_Package_Sources_for_Intel_Quark_v0.9.0.7z you will find this archive: Quark_EDKII_v0.9.0.tar.gz. This is the UEFI source code for Quark/Galileo.
To understand what it does, this document will help you: Quark_UEFI_FirmwareWG_517434_Rev0_9.pdf. It also can be downloaded at the link above.
fengyun_1999 Have fun studying UEFI code.
I tried to build Quark_EDKII_v0.9.0.tar.gz using the steps mentioned in the edk2 documentation but the build failed.
I tried to build it using the steps mentioned in the following edk 2 manual:
I am able to build the generic EDK II code but not the one customized for quark. Could anyone help me with building the same?
Were you able to build the code base?