1 of 1 people found this helpful
search in memory configurarion XMP (eXtreme Memory Profiles)
Thank to ColdfireMC.
More precisely this is how to change memory speed in Intel visual BIOS:
- From HOME screen --> Select TUNING
OR select ADVANCE --> Select PERFORMANCE
- Under PERFORMANCE, Click on Memory.
- Then from right hand side, select "XMP 1600" profile (name can vary but you will definitely get an idea ) from PERFORMANCE MEMORY PROFILES
This basically changed my Memory Multiplier from 10 to 12 resulting in 1600 MHz memory speed instead of 1333 MHz.
Hope this little tutorial will help other new users like me.
- From HOME screen --> Select TUNING
i have 16Gb DDR-III 1600MHz Corsair Vengeance (CMZ16GX3M4A1600C9) (4x4Gb KIT)
setting in bios XMP 1600, but after reboot when im entering bios i have 1333 but profile - xmp 1600, and timings same as auto mode.
in cpu-z having same timings as automatic mode, so looking like bios forcing memory clocks mode to auto instead xmp 1600.
What BIOS version and processor are installed in the system you have?
Have you tried with just one stick of memory one at a time?
Have you tested with other memory manufacturer?
BIOS : 0047
Processor : Corei7 4770S
One stick it will help, ? i'm changing memory timings and clocks in bios by selecting profile XMP 1600, bios not remembering it after reboot, after in memory settings bios still showing profile XMP 1600, but timings are not from XMP 1600.
No Im not tester, not have much memory 1600 around.
Did you see if there is any difference testing with just one memory stick?
One thing you may need to check with Corsair is what XMP profile does this memory support? Is it 1.2 or 1,3? Please confirm this with your memory manufacturer and let us know.
same behaviour with one stick.
by cpu-Z XMP 1.3.
even if im setting timings as in XMP manually after reboot i not see them, timings are equal to auto, but type of memory combobox are manually.
and memory clock multiplier was set to 1.33 X 12 and 1600 Mhz
but after reboot it writing 1600 Mhz, but showing Multiplier 1.33 x10. and by CPU-Z it have 1333 Mhz. it was if selected XMP-1600 in memory config but if im remember right same was if im selecting multiplier manually.
Thank you for your feedback on this matter, I have tried this configuration and is randomly working for me. So let me forward this to the developers for further investigation on this.
Before we may proceed, please let me have the AA number and Serial number of the motherboard.
Additionally, please use the Intel® System Identification Utility using the following site:
That will generate an 8 digits code called Report Reference ID. Please let us have that code, this will provide us information on what is being detected on your system.
with this online utility i have :
500 Internal Server Error: Intel® System Identification Utility was unable to analyze this computer or the service is temporarily unavailable at this time. The issue has been logged. Please re-run the utility at a later time. We apologize for any inconvenience.
sn : BTMC34200969
by Board ID Tool :
Could you please provide the information reported by Windows's msinfo32 then?
You can also include the dxdiag report from that system so I can include all that information to the report.
i have the same Problem!
I use a DH87MC with the newest Bios from 06.06.2013
And my Memory is a Corsair CMZ8GX3M2B1600C9 (4x4GB)
I can't install the ISIU from the Link above...
it means i have already a later Version installed - but it doesn't work!
So what can i do?
Please provide the following information from your system:
1. AA number and Serial number of the motherboard. The following link provides information on where this information should be located on the motherboard: (The serial number is on the left of the AA number)
2. Model of processor installed
3. Model and wattage of power supply installed
here the Data:
1. BTMC33000HBQ AA G74242 - 402
2. Intel i7-4770, 3,4GHz
3. be quiet! POWER ZONE 750W
And this will help?
what is the Solution for this Mistake?