Congrats on this one. Nice one. Thanks to your findings, many people will be able to install the RAID on the marvell controller.
Well I did the test, and I posted all the tests and information on this link. It is true there is a problem with the Marvell RAID Driver from the Intel Website.
In your previous post, you mentionned that you have a drive connected on the RED SATA Port, well this is for E-SATA drive only. It does not form part of the RAID from the Marvell Controller.
Anyway, if you need to any other help, let me know i will see if there is anything that i can do.
All the best,
I have a slightly different issue that maybe you've heard of. Using this board and Vista 32 bit, I also tried to use the blue Marvell connectors to add a hard drive in a non raid confirguration and the drive shows fine in windows upon bootup. The problem starts a few hours later when you try to add files to the drive, etc... it's gone! It simply dissappears from windows and all you get is a warning that the drive is missing or not ready. Do a cold reboot and the drive is back. Any ideas?
ps, the same drive works normal when hooked to one of the other board connectors besides the Marvell ones.
Thanks Aryan and your welcome. This was driving me crazy as well.
look similar problem
posted to edaboard forum
firmware detect sometimes the 4 disks another time 3 disks !! after with winxp i have many time out ... no solution