0 Replies Latest reply on May 23, 2009 4:22 PM by eschreibman

    D975XBX2 Marvell driver for Windows 7

    eschreibman

      Intel D975XBX2 Marvell SATA driver needed for Windows 7 Needed

       

      System:

      Intel D975XBX2 ATX Motherboard

      Intel Core 2 Duo E6600 2.40GHz 4M Processor

      8GB (4 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400)

       

      Summery:

       

      The 4 - port  Marvell 88SE6145 is not recognized by my Windows 7 RC 1 Build 7100 install.

      Installed Windows 7 (62 bit) onto  Intel D975XBX2 ATX Motherboard.
      I can not get windows to recognize the SATA drives attached to the internal Marvell card.
      BIOS see the drives, just not windows.

       

       

      Attempts / steps taken so far:

      Attempted to install during system staging via f6, was not able to get Win 7 to recognoze the drivers

      Attempted to install after staging both Windows XP 64 and Vista 64 Intel drivers (STOR_allOS_8.7.0.1007_PV), but the install fails with "system does not meet the minimum requirements).

      Tried using STOR_AllOS_F6flpy_1.2.0.51_PV_Marvell.exe during F6 (after unpacking and putting on CDROM of course)

       

      Tried just about every driver for all OSes on :

      http://downloadcenter.intel.com/filter_results.aspx?strTypes=all&ProductID=2578&OSFullName=All+Operating+Systems&lang=eng&strOSs=All&submit=Go!

       

      Including, but not limited to:
      "Marvell (RAID) driver version 1.2.0.60"
         "Intel® Matrix Storage Technology (RAID) driver version 8.7.0.1007"

       

      Device shows as follows:

       

       

      Capture.PNG

       

      Seems like same issue as in :

      http://communities.intel.com/message/19343

       

       

       


      Any Ideas or help appreciated very much.