1 Reply Latest reply on Apr 30, 2013 1:52 PM by Frank Jensen

    How to boot from a 3 TB HDD in D945GSEJT?

    Frank Jensen

      Hi guys,

       

      I have installed ubuntu server on a 3 TB HDD on my Intel D845GSEJT motherboard, but it will not boot.

      I have read, that I need to enable "UEFI boot" in the BIOS, but I can't find it.

      On Desktop Boards — Troubleshooting disk drive problems

      it says:

      -----

      Enabling support for 2 terabyte drives
      If you are using a hard drive 2 terabytes or greater
      in capacity, you must enable UEFI (Unified Extended Firmware Interface) in order
      for your system to recognize the drive.

       

      To enable UEFI:

       

      1. During boot, enter the BIOS setup by pressing F2.
      2. Go to the Boot menu.
      3. Set UEFI Boot to Enable.
      4. Press F10 to Save and Exit.

      -----

      I don't see that option in the BIOS. I have updated to the latest BIOS version (45), and the D945GSEJT is on the "This applies to" list at the bottom of the support page.

       

      Any help?

       

      Best regards,

      Frank