1 Reply Latest reply on Mar 19, 2013 10:21 AM by Dan_Intel

    D2700MUD - reboots/failure?

    Michael E. Olsen



      I am getting a terrible headache with this board.


      I had it running very nicely, then moved the PC to another location and suddenly the motherboard reloads endlessly.


      The board loads to the Intel logo (E7 es shown as the last status) and the it reboots. It can be seen here: INTEL D2700MUD - YouTube


      Hope someone has an idea how to solve the problem.


      Thanks in advance,




      PS, the board has the latest BIOS installed

        • 1. Re: D2700MUD - reboots/failure?

          Hi Michael,


          Proceed to take the board out of the chassis, unplug the power cord, remove all non-basic components, connect the power cord back in and try to boot up the system.  If problem does not take place, try installing the other components one at the time until you find out which is the conflicting one. Clear the CMOS battery for 30 minutes and try to restore defaults in the BIOS.