1 Reply Latest reply on Mar 15, 2013 11:19 AM by Dan_Intel

    memory upgrade for a D101GGC motherboard


      I cannot for the life of me understand the manual for this board, in this case, with regard to the memory supported.


      Memory  •Two DDR SDRAM Dual Inline Memory Module (DIMM) sockets

      •Support for DDR 400 MHz and DDR 333 MHz DIMMs

      •Support for up to 2 GB of system memory


      Will this support 2 gb of memory or not, if yes exactly what kind is needed?



      To be fully compliant with all applicable DDR SDRAM memory specifications, the board should be

      populated with DIMMs that support the Serial Presence Detect (SPD) data structure. This allows

      the BIOS to read the SPD data and program the chipset to accurately configure memory settings

      for optimum performance. If non-SPD memory is installed, the BIOS will attempt to correctly

      configure the memory settings, but performance and reliability may be impacted or the DIMMs

      may not function under the determined frequency.

      Table 4 lists the supported DIMM configurations.

      Table 4. Supported Memory Configurations


      Capacity  Configuration



      SDRAM Organization


      Number of SDRAM


      128 MB SS 256 Mbit 16 M x 16/empty 4

      256 MB SS 256 Mbit 32 M x 8/empty 8

      256 MB SS 512 Mbit 32 M x 16/empty 4

      512 MB DS 256 Mbit 32 M x 8/32 M x 8 16

      512 MB SS 512 Mbit 64 M x 8/empty 8

      512 MB SS 1 Gbit 64 M x 16/empty 4

      1024 MB DS 512 Mbit 64 M x 8/64 M x 8 16

      1024 MB SS 1 Gbit 128 M x 8/empty 8

      Note: In the second column, “DS” refers to double-sided memorymodules (containing two rows of SDRAM) and “SS” refers

      to single-sided memory modules (containing one row of SDRAM).


      I' ve searched for memory with  Serial Presence Detect (SPD) data structure but no luck.


      Thank you for your help.

        • 1. Re: memory upgrade for a D101GGC motherboard

          Hello Terry,


          We would like to inform you that this motherboard will support 1GB on each memory slot, for a total of 2GB maximum for memory system. Since this motherboard was discontinued back in 2008, is really difficult to locate memory rated at the specifications that the board supports due to discontinuance and that memory technologies are constantly evolving.


          We recommend getting memory with the following specifications:


          - DDR 400 MHz and DDR 333 MHz DIMMs rated at 2.5V

          - Non-ECC DIMMs


          Further information can be found at the Technical Product Specification page# 15: