I just tried to start my new DH67BL system. I see that I have power at the board LED, but when I pushed the power switch - nothing. Absolutely nothing. No fans spinning up, etc.
I find that when I apply pressure to the cable connection at the On/Off pins and hold it there (I'm on the front panel block), the board starts up, the switch works, etc.. As soon as I release the pressure, the system goes cold.
I fear that I have a bad board and will have to gut all of this work, but I thought I'd ask for advice/help first.
Does anyone have any idea why I'd have to apply pressure to the connection onto the pins?
Thanks in advance,
I have the same problem. But when I unplug battery + ram + power cable for 1 hour, The mainboard will run properly. Sometimes, it occurs again