0 Replies Latest reply on Feb 4, 2013 8:10 PM by kevins7189

    Teamed Adapter setup not working windows 8

    kevins7189

      I'm trying to set up an ALB configuration for teaming, and it doesn't seem to work (intel driver 17.4 10/17/12, 12.1.77.0).  The team creates OK and I can see the two adapters in the teaming dialog (both show active) test switch is OK, details show MAC of one NIC as expected.

      However in network connections, the team shows "enabled", I get no IP returned from DHCP, and when right click on Team: Team #0 - Status I show no IPv4 or 6, media state enabled, packets are counting.  Details show NOTHING, I would expect to see here the MAC of the teamed connection among other things.  Both connections work separately.

      I did a tcpdump from another machine on the network as see this


      21:09:35.256309 90:e2:ba:26:31:69 (oui Unknown) > Broadcast, ethertype Unknown (0x886d), length 64:

        0x0000:  0001 0001 0000 037d 0002 90e2 ba26 3168  .......}.....&1h

        0x0010:  fd81 7900 7000 6500 0000 0300 0308 4e44  ..y.p.e.......ND

        0x0020:  706e a901 5468 fc7b 8086 0000 0000 0000  pn..Th.{........

        0x0030:  0000                                     ..

      21:09:35.256338 90:e2:ba:26:31:68 (oui Unknown) > Broadcast, ethertype Unknown (0x886d), length 64:

        0x0000:  0001 0001 0000 037d 0001 90e2 ba26 3168  .......}.....&1h

        0x0010:  e986 7500 6d00 5000 7200 6f00 6200 6500  ..u.m.P.r.o.b.e.

        0x0020:  5200 6500 7400 7200 7900 0000 6500 0000  R.e.t.r.y...e...

        0x0030:  0000 

       

      Board is dual port 82576 PCI express.  Not sure whats going on here.  Windows troubleshooter doesn't help.

       

      thanks