1 Reply Latest reply on Jan 21, 2013 1:05 PM by Dan_Intel

    DH67BL Onboard Graphics disabled


      I have Intel DH67BL board with core i3 2320 processor


      I tried to tune on board graphics in wizard mode..so i changed the refresh rate but the video mode was not supported...But what happened was that every time i boot the same error message appeared in monitor.. so i tried to change some settings in BIOS ..disabled the on-board graphics.


      Now i hear 2 beeps which as per the manual...is "processors requiring graphics card


      how to recover..kindly help Bee

        • 1. Re: DH67BL Onboard Graphics disabled

          Hello Sengottuvelavan,


          We recommend removing the RTC (Real Time Clock) battery and leave it out for 20 minutes.  After this period of time, insert the battery back in and turn the system back on; if it displays POST messages, go into BIOS Setup Utility by pressing <F2> during the boot process.  Once in the BIOS setup utility, press <F9> to restore BIOS default settings.  Reset any customized BIOS settings. Clear all DMI event logs, which are located in the Advanced/Event Log Configuration section of the BIOS Setup utility.  Press <F10> to save the new settings and reboot the system.